I was wondering How to make Crank or Raw Meth? If anybody can help me then it would be greatly appreciated?

go here... http://chemhead.homelinux.com and read and read and read till you are positive that you are ready to try something like this.

I have read and read everything there is to know about Crystal Meth and how to make it but there is no recipe for Crank or the raw.
All I want to know is how to make Crank and thats it. So please help???

quote:

---

Originally posted by Sexybwai:
I have read and read everything there is to know about Crystal Meth and how to make it but there is no recipe for Crank or the raw.
All I want to know is how to make Crank and thats it. So please help???

---

No offense but if you've read everything on Chemhead, and STILL don't understand... maybe you should leave it for someone else.

Those are all very valid methods of creating these substances, however, this method is my personal favorite.

In a large bowl, mix flour, eggs, milk, and sulphur for extra kick.

That is all.

All that crank is is dirty as meth. why the hell you would want dirty shit like crank is beyond me, but i dont think you realize what crank really is.

Hahah thats same funny shit Mango

you want to manufacture pure meth.ya don't want raw meth.take the raw meth and recrystallize to pure meth.simplest way to make meth is found in 'Journal of Chemical Education page 671 year 1974'ya need phenylacetone (aka 2P2),alcohol,25%ammonia,aluminium grit,mercuric chloride,hydrochloric acid,ether,magnisium sulfate,potasium hydroxide.reflux condenser,stirrer.that about all. don't blow your self up working with ether.ether can be replaced with other organic solvents.IT IS AGAINST THE LAW TO MANUFACTURE AMPHETAMINE.

ether, whether it be petroleum or ethyll, is extremely dangerous. the vapour released in the noxious fumes is far heavier than air, and will leech on to floors and walls. this vapour is explosively flammable, and any source of heat, even an electric heater, or any form of spark will result in the fumes and ether source combusting explosively. when working with ether, work on a day under 25 celcius, in a reasonably moist environment, far away from any heat source. if a heat source must be used in an experiment invloving ether, wait a few hours before lighting things or using a hotplate. this should help erduce accident risks.

Can it you two.
Ethyl ether is dangerous not as dangerous as you make it out to be(I used shitloads of it today), petroleum ether is less dangerous than gasoline.

bbell that is not the simplest way to make meth, heck that journal article is for making racemic amphetamine not meth NO.

i always thought raw meth was pfed and that you wanted to "cook" that not keep it like it is

easy take 75grams redp. 150grams ephedrine. 225grams.Iodine crys.get a 1/2gal bottle of pepe lopez tequila ck for cracks. (never seen one break yet in over 200 times )get fry daddy throw some nickels on the bottom 10-15 to keep bottle off bottom. add 1 inch of grease, some use sand .put your rp in the bottle first. your E SECOND DON'T MIX LET THERE BE ONE LAYER OF RED ONE LAYER OF WHITE i'll tell you why in a minute.ok now you have your frydaddy with sand or grease pluged in and ready turn it on just barely.ok you have your bottle of pepe sitting there one layer red one white. now you need about 9 ft of heavy clear hose the kind with the webbing. you can put it down in a 12 #plastic jug of kitty liter tape it off real good but poke a couple of sm hole in the jug then put in two or threetrash bags tape up tight leave a little room so bags can swell. on the other end of hose put a coupling that will fit on neck of bottle get it in pluming dept. it has screw clamps you want it ready to go taped on your hose good and tight tape ,tape, tape..kittyliterbags ect. now get ready put your bottle down in the frydaddy get a funnel and add your I2 HAVE YOUR SHIT TOGETHER BEFORE YOU DROP I2 BECAUSE THERE IS NO TURNING BACK HAVE TAPE ,SCREW DRIVER.okay you drop I2 PUT COUPLING ON BOTTLE SCREW DOWN TIGHT THEN TAPE IT OFF GOOD AND TIGHT NO LEAKS USE LOTS OF TAPE TAPE IN A DOWNWARD PULL TO SNUG COUPLING TO BOTTLE USE BUNGIEE CORD TO HOLD BOTTLE IN PLACE TURN UP TO ABOUT 250DEGREES.. DON'T FUCK AROUND. THE WHITE LAYER BUYS YOU A LITTLE TIME BECAUSE WHEN THAT I2 HITS THAT RED ITS ON . HOLD ON CAUSE IT'S SOMETHEN TO SEE.COOK AT 250 FOR THIRTY MINS THEN 12HRS AT 225 MAKES ALMOST NO SMELL IF TAPED RIGHT MAKES ABOUT 4OZ'S AT LEAST THATS WHAT I HEARD. BE SAFE TAKE YOUR TIME . SOME OF THESE GUYS ARE REAL PRICKS JUST TELL THEM TO FUCK OFF

quote:

---

Originally posted by Sexybwai:
I was wondering How to make Crank or Raw Meth? If anybody can help me then it would be greatly appreciated?

---

that has to be one of the stupids ways to cook that I have ever read. start at 250 degrees? then at 225 for 12hours?? you have got to be fuckin kidding. Its way to hot and for WAY to long. It takes no longer than 1 to 1.5 hours to cook and should never be turned up more than 180. The way that is posted is a good way to come up with a 4 ounce pile of shit.(if you can even scrape it off the bottom of the flask)

[This message has been edited by methmaster (edited 10-27-2002).]

back off red neck negro you want it to hit hard you want it violent right at first.then you turn it down to 2 225 . you have to give it a squirt of water every so often to keep it from drying out so it doesn't stick you bowl of fuckstain. its called paying attention jr.makes shit that will make you throw up if you hit it .. and if you EVER insult me again I will beat you with your brains in a sock fuckwad now you say i'm sorry mr. reptile.
at first

quote:

---

Originally posted by methmaster:
that has to be one of the stupids ways to cook that I have ever read. start at 250 degrees? then at 225 for 12hours?? you have got to be fuckin kidding. Its way to hot and for WAY to long. It takes no longer than 1 to 1.5 hours to cook and should never be turned up more than 180. The way that is posted is a good way to come up with a 4 ounce pile of shit.(if you can even scrape it off the bottom of the flask)

[This message has been edited by methmaster (edited 10-27-2002).]

---

youre a fucking moron reptile

thats mr. moron to you fuckstain. my friend stands by that recipe ! of course temps can b modified you have to watch it flim boy i'd like to see you do about 60 cents worth up the old vein you would diff cough .. gotta go fuck your mom.

quote:

---

Originally posted by D.N.S:
youre a fucking moron reptile

---

you are so far off base you fucking idiot, i would be willing to bet that it makes you throw up cause its SHIT not cause its good.

"you want it to hit hard you want it violent right at first" --- no you dont, you want it to go as slow and steady as possible. kickin it off fast like that will only chew the shit out of your ephedrine.

"then you turn it down to 2 225" --- no you are supposed to slowly keep turning the temp up for an hour not the other way around. DOing that will only cause problems you stupid reptile. Not only that but 250 and 225 are way to fucking hot. You like burning your shit up retard? You must.

"you have to give it a squirt of water every so often " -- not if you know what your doing you dont. I have never ever had to do that and I can garuntee that I have been doing this for a lot longer than you have been. You should take some constructive critisism little boy, may be you could learn something

i don't have a prob learning its the way every body does it this was how i lear
ed. its the way i know but it allways has turned fine product ill try it your way and see if it works for me i'll change for the better. old way had big front door and legs but i'll try that .some smart asses need to stop the insults or there off my christmas list

Well now that your post is up Veryfirstreptile, you should probibly describe the Ph bump in bump out process so some poor fucker doesn't do a cook and smoke the chilli.

bump in bump out, ? all i know is my friend pours out this wonderful purple syrup in filters and this nice yellow syrup comes out letting him keep his red to clean and use again. noww where were we ah! yes the yellow syrup now boys and gorls he tells me its lye time get your ice cold xylene,toulene,colemans,ect.cup of boing h2o.
(did you asshole like that}pour the boiling hot water into the thick yellow gooo add lye. stir watch out it mite rare up on you hit it with cold xylene stir tune in next week kids

oh and by the way mr. methmasterbaiter my friend also likes to enject about 1 full c of muratic for {dragon breath}that taste or a c of sulferic {kind of laid back x front door .and as always back end for days. smokes like water,not harsh, breaks dowwn clear as water. he calls it{sixty year old biker throw up dope} gotta go one last insult to methmaster baiter. i thought about you this morning.bbut what the hell I FLUSHED IT , AFTER THAT I HAD TO TAKE A REAL BAD D.N.C. IN OTHER WORDS YOU ,DNC AND A FEW OTHER ARE NOTHING BUT LUMPS OF SHIT .THE SAY REASON I SAY THESE THINGS IS BECAUSE YOU GUYS INSULTED ME .IF SOMEONE DOES SOMETHING WRONG BECAUSE THEY DON'T KNOW ANY BETTER IS THAT A REASON TO CALL THEM A MORON. I'M ALLWAYS WILLING TO LEARN BUT NOT FROM SOME SMARTASS. YOUR THE ONE WITH AWFUL MANNERS
IS ANY BODY ELSE SICK OF THESE SMARTASSES.

Im sick of you being an idiot and telling people fucked up methods, thats all Im sick of

who wants to make methamphetamine conisures of fine drugs much preferr amphetamine. who wants the rush from meth amphetamine is a much cleaner high

If you are ending up with a heavy yellow syrup... that means its hella dirty. Swim does the loq temp raising cook. The best way to do it is to make an Ice Bath first place your flask in it and then mix in RP/E then add I2... then place a reflux condenser. Let it set in the Ice bath for 25-30 minutes. Then remove it and let it set at room temp untill you notice that the reaction had stopped (usually another 20-25 minutes for swim). Then you add it to heat. Starting with a temp of around 125... then slowly raise it to 170 over a time of 1 hour. Then you get a nice liquid, after filtered you can still reuse the RP, but you end up with a nice clean clear liquid. What yields do you get with your method? Shit, this method after a couple times of doing it yields swim about 92-95 %

Yeah, you are one retarded mother fucker, reptilebitch. You can tell that you haven't had much experience with the production. You think you're a hardass, fuck yeah! Keep talkin'.