..

[This message has been edited by markel27 (edited 06-08-2001).]

Gimme an N!

Gimme an A!

Gimme an R!

Gimme a C!

What's that spell?

Fuck off!

A licenced locksmith, like myself, has no problems obtaining such keys.

I'm begining to think this board is a den for law breakers.

I hope to one day grow up and be a law maker and heart breaker. That'd be a good lyric.

Anyway... I cloged a toilet today with a fierce shit.

Word

WHATS THE DEAL WITH THE MASTERKEYS ,JUST A SHAMELESS PLUG OR A TRUE TESTIMONY. I THOUGHT ABOUT BUYING A COUPLE A MONTH OR SO AGO (FOR LEGITIMATE PURPOSES OF COURSE)BUT WAS A BIT SKEPTICAL.FUCK IT WHATS 25 BUCKS TO FIND OUT.DO THE HONDA KEYS WORK FOR ACURAS,TOYOTA FOR LEXUS AND NISSAN FOR INFINITY YOU GET THE IDEA.

if only they made keys for chevys.....

.....my math teaher's van, late at night, joy ride, bottom of mississippi river......


MIR

i was think its only 25 buck but then again that is what every body is thinking and this motherfucker could make a lot of money like that want the hell my money orderis in the mail . by the way they do make master key sets for chevy but there is a lot of keys to try and they cost alot more then 25 bucks i will let every one know if i get a key or not

Thanx man make sure you let us know all about them, do they work on newer versions, do they only work on US models and do they realy open house looks etc.....

Oh and tell which set you ordered, Thanx again....



[This message has been edited by Mustard (edited 02-13-2001).]

i just wanted to say dat, y did you tell every one about the site. you could have kept it to your self and made bare monies?? there must be a catch, but fuck it im prepared to fall for it!!!!

Hey lumberjack boy did you ever get a key. if so give us info. I asked soemquestions earlyer it would be realy nice if you could answer soemof them for us....

hey a got my key in the mail today i ordered the dodge key . i just tried it on my friends dodge shadow it opened everything trunk doors and ignition you have to move it around to get it to work but its not that hard i will try some more cars this weekend and keep everyone posted ....

ok this weekend i tried 5 dodge shadows but
only opened 3, and stared them. i open one full size ram truck and one dodge dakota. if any one else get another key let me know if it works im try to make enough money with this to pay for the other 3 .

does it open houe locks (sounds stupid but the title of the page says so !)
Do you know if it works on european models ? - a long shot but it would be nice to know !

there is no way in hell it will open any house lock it would not go in it is to big. as for euro car i have no idea i dont no the difference i have never been over there or seen a car from there. has any one else sent off for any other of the keys? keep me posted.

I thought is sounded stupid but i thought i better get you to clear it up. Does your key open Chrysler Voyagers.

i'm sure it will i have not tried one yet mini vans make me nervous i would hate to wake up some big motherfucker sleeping in the back as i drive off with his car. i have open some jeeps and shit like that the ing is kinda hard but if you just keep moveing it around it will turn evently trunks are the same way but most of the doors are easy as fuck i am going to mail off for the rest of the keys tommorrow i will let you know how they do.

I'm happy with my slim - jim. Opens more car doors than any one of those keys. So far I only used it on people who lock their keys in the car (brother & wife, mainly).

I'd never use it to steel carz. Don't have the balz & my luck, cops will pull me over for whatever reason!

------------------
Dr. Death & Dr. Giggles were there - WEFX 97.9MHz!!!

here is the latest update on my key project yes it works on voyagers and urza you are in luck it workd on chevy's to i still don't believe it my self but i was just fucking around with my car which is a newer chevy and it worked i have not got my other keys in the mail yet i will keep you posted. fuck the slim jim i have on two but if youwalk up to a car with a key know on will think any thing about it you can do it in broad day lignt ..

thanx

i am still waiting for the rest of the keys just want to keep everyone posted. has any one else order a key yet let me know if you have time i know how busy you will be.

i got the rest of the keys in i'm going shopping i wil report back in a couple days.

yo man , i got this dodge+crysler master key
but i need a lil more info

does eney one have a list of cars they got into or a list of all the cars that the master key works for.
and do you have to go threw the passenger side? and what does he mean on the instructions you have to jiggle it? or to u insert the key then turn then insert the key deeper and turn untill u unlock>?

if yall can help me out holla at me

common peopole help

first off i think in the USA possesing a master key is most likely a felony. 2nd, you really do have to be a cop so just go fuck yourself. isnt that intrapment?

white witch why bother posting a reply if you cant answer correctly

anyone else order from these guys? i want to hear some feedback from people who have ordered from them

yeh fuck , they do work shit and its alot easyer than hotwireing

i took my grandmas labairn out for a spin and fuckn ram's neons fckn dekota intrepeds and bounch of other cars that i opend..

now the only thing we have to master about this is not getting cault in our crimes

oh yeh i forgot , if u ever think he isnt gonna send em to u when u put the money in , just rember this i live in canada and i got myn in 4 weeks , but it kame in an envalope and my mom wonderd what it was , so i would hide that shit and check the mail ur self

hmmmmmmm, ok ill just try and get them to ship it in a special way or something. thanx 4 the feedback

I have become webmaster for this site now.
Got them a whole new site!

http://carmasterkeys.cjb.net

plz use internet explorer, site looks crappy on netscape and "accept" buttom cant be seen. the site is best viewed with 1024x768.

I am getting the Honda key free of charge...




[This message has been edited by neur0t0xicity (edited 05-16-2001).]

if your the webmaster , then how come http://www.carmasterkeys.com/ isnt changed?

hey can someone tell me why do we have to only use the passenger side door with theze keys? i thought the locks wer the same on all of he doors of the particular car.

hey what up i'm glad to see some one else finally listen to me and order one of the keys they r pretty fucking cool don't you think the reason you use it on the passanger side door lock is because dodge has a key system where they have a vallet key that only works on those lock the vallet lock have less tumblar and are easier to pick. if you r the same person that emailed me you will already have this infomation but hereit is again most car and trucks try the passanger side door 1st but on suv like jeep cherokee and chevy blazers try drive side door 1st the key has worked on about 75% of the chevy i have tried and about 90% of dodge cars as soonas i fix my fucking hand i will let you know about the n, h, and t, key if you figure it out any thing about the other keys in the next 3 weeks let me know also don't be stupid the cops try to set up decoys so pay attention or you will get busted. good luck.

yeh i emaild u back , but forgot to ask where you got the chevy keys?? or are they the dodge/chrysler keys that work for the chevey.

oh yeh , and wats the jail time if u get busted?

quote:

---

Originally posted by bigsnoopdeezy:
if your the webmaster , then how come http://www.carmasterkeys.com/ isnt changed?

---

it is now
(refresh needed maybe)

the dodge key works on Chevy too you have to cut the tab off of the top of the key to get it to work in the ignition but it works good i have read a few file on car thief and the jail time is all different on what you get charged with there is grand thief auto i think that is 10 years then joy riding and that is a mistameter but it probable depends on your previous record

neur0t0xicity, how much are the Honda keys?
If you are the webmaster, just a thought could you tell me if my cances are good of delivery if i live in australia..

So they do work... hmm... im kinda interested now... =P

all keys are $25

if you live outside the US, are get charged $5 shipping costs.

soon safe and secure credit card ordering will be set up.


---------------------------
ps. what do you all think of the site? what can it be improved? are there any errors? please feel free to apply in the "i found it on the web forum" cause this had nada to do with bad ideas.

i think carmasterkeys.com could use a web board for help , because when i first got my keys i didnt kno jack shit what to do , or what they open. you also need a list of what cars the keys work for to be a bit more proffesional .

[This message has been edited by bigsnoopdeezy (edited 05-20-2001).]

I can't get the ordering thing to work, do you take checks?

------------------
Do as I say, Not as I do.
Visit my BSS Deaths Kitchen www.fieldings43.freeserve.co.uk/DK.htm

if anyone wants copys of the keys you can e-mail me my prices are 15 for one 30 for 2 and 50 for all four it will piss off the webmaster but it will save everyone else some money

i just am wiating to hear from one of you from the prisons library telling us "Bad Idea".. Intrapment is a crime that most police agencies get away with these days. If it was only the easy to purchase a master key every fucking theif in america would own one. come on guys, dont tell me you are falling for this shit.

White Witch

i know you don't belive us , but belive it or not , master keys do exist , but i'll tell u this they are not master keys (exactly) they are more of a lock picking key , or (advanced emergiancy lock out tool), like a slim jimm or a lock picking set and im shure if you ask a locksmith in your area he will likely tell you they do exist..

i bought one and got it in the mail , and i have used them my self/sold them to my frends also , they like it , i like it ..it works and thats all i need to kno ..

shure i was sceptical at first , but i had money to throw away after winning the lottery (100bucks) so i said fuck it , if i get it that would be cool , if i dont..its just 25bucks (damn neer 50 in canadian)
and no one is forcing eneyone to buy theze things.. if they want to buy them they most likely will , if they dont ..they dont

and thats my 2 cents ,take it or leave it

Bongman, Alan... are their IPs all the same?

Although I have not seen the keys we are discussing, I do know that such thing is possible...I have a set of "jingle keys." Locksmiths use to get into cars...They look very similar to the "master keys" that are for sale...You use them to rake the pins and apply torque at the same time to turn the lock.

Somebody with these keys should scan them, and post a link...so that us with a little technical knowledge can cut our own. Fuck 'em...

Thats a pretty good idea....

quote:

---

Originally posted by dozed202:
Thats a pretty good idea....

---

Thats a great idea. Post demensions (spell_ as well.

i know a few people with key cutters. also get the raw keys serial/model number. you cant just use any raw key to cut with.

ok , when you make a key , is there codes that u can use to make a key , instead of copying it?? , becaus if i can find out the codes on my key , ill just post it and yall can make a key for ur self.. i dont have a scanner so i cant really scan it , but if i find someone with it , ill do it

WTF... Code? oh you mean does a key cutter use codes to automatically cut keys to shape? i dont know. I dont think they are that advanced yet. Just take a picture of the key. post it. add demensions of it.

Example 12.34cm( _/\_/\/\/\__/\>

im not good at measurments so laugh at me.. but you get the idea.

[This message has been edited by White Witch (edited 05-24-2001).]

uh , i cant scan it.. and as for demensions i was never good at math..

looks like this thow...

/��\__/\___/�����|
|-----------------|
\__/��\/���\_____|


its not exact but u get the picture thats without the tab on the key
this is the dodge key i have , and some days u can have the worstest luck with it..other days its easy as pie , thows 2 pins that stick out on the key rake the pins in the lock and open/start the car

[This message has been edited by bigsnoopdeezy (edited 05-25-2001).]

why cant you scan it? no scanner? go to a library or to KINKOs or Copy Mat or any business that charges like 2 bucks a scan. Tell the worker to fuck off because what you have is private and if has to view it you will have to kill him because its top secret.

yes sir!

What about FORD ?

ford?...uck ... just use a screw driver

Hey lumberjack boy I sent you the money for those keys and you didnt send me shit!!!
U tryin to rip us off??????

quote:

---

Originally posted by lumberjack boy:
if anyone wants copys of the keys you can e-mail me my prices are 15 for one 30 for 2 and 50 for all four it will piss off the webmaster but it will save everyone else some money

---

the day i get the money your keys will be in the mail

yeh , sending usually takes a lot of fuckn time if its just threw mail.. but if u had the money u shoulda had it sped-exd

Do you take checks Lumberjack?

------------------
Do as I say, Not as I do.
Visit my BSS Deaths Kitchen www.fieldings43.freeserve.co.uk/DK.htm

lumberjack.. i dont want to accuse you. but i hope you aren't trying to rip people off here.

The sad thing is I think this is illegal to purchase these keys in America, and if he was to rip you guys off there isnt a court in the country that would really prosicute him unless they did the same to you for trying to possess an illegal key. which i believe is a felony and his would be a misdamener(spell). So he could in fact burn you guys very easily.

But then again he maybe honest. but if he isnt I hope he isnt burning the wrong person (No threats from me) but also if he burns you guys he wins!

theze keys are gay, lately ive been havin the worst luck with them , i even got chased buy some crazy bitch with pepper spray! kuz she thought i was tryin to take her car (i was) , dont get me wrong , they work but its a bitch and u gotta jiggle them alot , and its gay cuz u have to go threw the passenger side... gay gay gay , and if u think it would be easy in the day well unless u live in a big city with parkinglots galore , id stick to the night life

i'm not trying to scam any body i'm trying to help everone out and save ya some money i .mustard of course i will take a check will it clear . theses keys are not fool proof sometimes you will get frustrated and pissed off but the more you pratice the easier they are to use i can open my car with the master key just as fast as i can with my oringial key so all it takes is practice

what the fuck does that mean "Practice"? either you stick them in and they work or they dont work. you telling me you have to giggle the things to turn the tumbler? HELLo!!!!!! does anyone else see the red flag here?

man , there are no such things as master keys, its just a lock pick ..and i got it to work again on a 2000 dodge ram

of cource u gotta jiggle the thing to line up the tumblers in the lock then it opens , all thow my frend got his moms car open the normal way.. weird

this is the instructins that came with the key...

MASTER KEY INSTRUCTIONS:

Method 1: (for use with ignition cover)

Door Locks: Insert the key all the way in the passenger side door only, then start to move the key rapidly
up and down, at the same time turn the key to the unlock position every 2 secconds and at the same time
slowly pull the key half way out and reinsert it doing all of the steps, repeat process until door lock
opens.

Ignitions: Insert the key all the way in, move the key rapidly up and down, while slowly pulling the key
out half way then reinserting it, at the same time turning it to the start position every two secconds.

Ignitions #2: (this method may damage the tumblers but works very fast.)
insert the key all the way in, move it up and down rapidly, at the same time pulling it out a quater of an
inch, then stop every 4 secconds, and use both hands to grip the piece of the ignition that covers the key then turn it to the start position extremely hard. Repeat process until ignition turns.
___________________________________________________________________________________

Method 2: (for vehicles with no ignition cover)

Door Locks: insert key all the way in the passenger side, move the key up and down very rapidly, at the same time slowly pulling it out half way, then slowly reinserting it, at the same time turnig it to the unlock position every 2 secconds. Repeat process untill door locks open.

Door Locks #2: (this method may damage the tumblers)
insert the key all the way in on the passenger side, then move the key very rapidly up and down, at the
same time pulling the key out a quarter of an inch then reinserting it, then stop every 4 secconds, using a
pair of pliers turn the part of the key that is clostest to the door lock, (so you don't bend the key) turn to the unlock position every 2 secconds. Repeat process untill door locks open.

Ignition: insert the key all the way in, move the key rapidly up and down, while slowly pulling the key out
half way then reinserting it, at the same time turning it to the start position every 2 secconds.

Ignition #2: (this method may damage the tumblers.)
insert the key all the way in on the ignition, then move the key very rapidly up and down, at the same time
pulling the key out a quarter of an inch then reinserting it, then stop every 4 secconds, using a pair of pliers
turn the part of the key that is the closest to the ignition (so you don't bend the key) Turn to start
position and Turn hard.

**Note**
Rotate Key to other side every 2 tries.
**Note**
Odds for beggining users 1 out of 3 vehicles
Odds for experienced users 1 out of 1 vehicles
**Note**
Master Keys Are not made to perminatly replace a vheicles original key.

**WARNING**
Master Keys are not recommended or intended for any illegal purposes , the seller of the Master Key(s) takes no responsibility for any illegal acts made by its purchaser.

im not trying to be mean here guys. but i thought a master key was just that. A key that opens almost all cars/locks that that key was designed for. it has a certain code of peaks and vallies that will open all locks of that brand. all locks are made that way today for emergency reasons. most car dealers, some police and some tow truck drivers have them.

yeh , but there usually sets of 100 or 50 , and cost around 200 bucks

Hey Lumberboy!!
I want my MONEY BACK!!!!
Where are my keys!!!???????Makin 50$ off me for free..that aint coo bitch!!

quote:

---

Originally posted by lumberjack boy:
if anyone wants copys of the keys you can e-mail me my prices are 15 for one 30 for 2 and 50 for all four it will piss off the webmaster but it will save everyone else some money

---

these seem more like advanced lock picks. I have an idea. I goto a lock cutter, get an appropriate blank key for, say, the 92-97 toyotas. then cut it in a general shape of this drawing:
/��\__/\___/�����|
|-----------------|
\__/��\/���\_____|
and feedback/suggestions?

I have a question for anyone who's bought the keys: are the pictures on www.carmasterkeys.com accurate? do they look the same as the key you bought?

corurse not.. there not idiots to show pic's of the keys..

and , if u fedex me the money ill fedex u the dodge key ..ittle be ther over night but im in canada so ittle cost abit. http://www.fedex.com/us/about/express/

20 bucks canadian + buyer pays shipping...
email me at: bigsnoopdeezy@yahoo.com for mor info on purchasing..

trust me ...dont do it threw snail mail , or u have a chance of the mail men ripping u off.. thows bastards stole my birtday money

[This message has been edited by bigsnoopdeezy (edited 06-03-2001).]

interesting coincidence, i lie in canada, too (montreal to be specific). any body in montreal that has a master key?

i have not got money or an email from thug so i don't know why you are trying to say i riped you off i don't do busness like that . about the key shape i have all the key and they are all different in shape if you just want a pticure of one of the keys you can email me and i will draw one the best i can but they are hard to cut by hand because i have been thying to make one for some mazda and ford cars but if you want to try for you self i will draw it for you.

quote:

---

if anyone wants copies of the keys you can e-mail me my prices are 15 for one 30 for 2 and 50 for all four it will piss off the webmaster but it will save everyone else some money

---

Why would it piss me off? I dont sell the keys, now do i?

Anyways, im sure its pretty clear by now that they keys 1-show up when you order them 2-work 3-work like hell

So lumberjack, you copy the keys?
I think you people here are all smart enough to know that copied keys never are a 100% duplicate. Theres always a small error when you copy something, the same can be said for keys. Didnt any of you ever have the experience when you copy a house door key, that key sux. Its harder to open the door with it. It doesnt open as smooth.
Now these master keys are very delicate keys. They need to be perfect in order to do what they are supposed to do. As some of you already mentioned, its not as easy as it seems to open car doors with the master keys as it is. Now imagine trying to open a door with the copied master keys... You will have way more struggle, that is, if you get the door open in the first place...
So why not order a real copy of a key for a couple of extra bux? I would, thats for sure, but then again, i aint stupid.

Isnt that right thug5150?
by the way, got your keys yet?

check out these drawings.
here is one by bigsnoopdeezy: http://www.hellonearth.8m.net/dodgemasterkey.jpg

here is one lumberjackboy drew: http://www.hellonearth.8m.net/masterkeyz.jpg

good luck to anyone who tries to make their own!



[This message has been edited by [C][R][U][S][T] (edited 06-09-2001).]

Good work on the drawings, I appreciate it.

I was wondering if anyone knows if the cars real keys look similar to these... if so, you could take a real dodge(or others) key and file off a couple of teeth to make it look like that...

If that won't work I will probably glue the pictures of the keys onto a sheet of hard plastic and file the outline into the plastic...then have a friend copy the plastic key on to a metal one...I'll let you know if this works.


[This message has been edited by Sober (edited 06-09-2001).]

I just asked the webmaster how the keys work and he said they are specialy cut...then magnetized or sum shit??
..still never got my shit from lumberjackfuck!!!

one Question. Does this work for both doors and ignition?

you can always magnitize the key yourself..its not rocket science..but i dont see why the hell it would need to be..maby for the tumbler pins

specialy kut my ass... ive copyd tunz of keys for frends (without magnitize) and they work just as good as the original..

and sometimes they work on the driverside , its just the passenger side door is the vallet lock and its easyer to pick..

the dodge key has workd on cheveys for me now , thanks to lumberjackboy who told me they did.. i found my self able to get into the newer trucks and cars with ease..althow he said some dont work at all i havent ran into that problem...the only thing that i had a problem with is the thumb grip blocking the tab on the masterkey , but you just kut that down smaller and your able to stick it in and start it up...

i think the webmaster is bullshittin you about the keys.. if thats the case just get ur key from lumberjackboy and make a copy but ask them for a metal key so u can magnitize it , or just email me and ill sell them to ya threw paypal , only 20bucks canadian + 5 bucks shipping ... i only have one key thow and thats the dodge

Thug5150, it sounds to me like you are just trying to stop people from buying from Lumberjack boy. on 4-21-01 you started a topic in the "found it on the web" forum- http://www.totse.com/bbs/Forum13/HTML/000217.html -were you not only advertised for www.masterkeys.8m.com but said you had purchased two of the keys.

My question is why would you send Lumberjack boy $50 (the price of ALL four keys) if you already had two of them?

and now you are saying that these keys are magnetized??? that makes absolutely NO SENSE!!

I know why neur0t0xicity would discourage people from purchaseing Lumberjack boy's keys but...HMMMM....Why would you????

I want some of these keys but I don�t know if I can trust ya, this board by its nature is full of untrustworthy characters... But judging by the number keys bought I know that you can buy them from the site.

------------------
Do as I say, Not as I do.
Visit my BSS Deaths Kitchen www.fieldings43.freeserve.co.uk/DK.htm

ahh , good eye , i think Thug515 is the owner of carmasterkeys.com i know for a fact that markel27 is the owner... if someone could compair IP numbers with the 2 markel27 and thug515 and see if they are in connection


my offer still stands for my key , you can trust me , i allready gave u guys measurments

i just want to earn my 50 bucks back from buying the key.. and if you want your key really fast , if you pay i will fedex and itll be there in 2 days or less , garon-tee
just email: bigsnoopdeezy@yahoo.com and ill set it up... its only 20 buck canadian... not 25 us

did anyone notice that bigsnoopseezys post wiht the drawing and the measurements of the key has mysteriously dissapeared?

[This message has been edited by bigsnoopdeezy (edited 06-12-2001).]

First off.....the "master keys" u people are talking about on the web site are not master keys....their called "jigler picks" ...thats why you have to move them up and down....you have to jigle them....second the key in this guys pic is not a master key its called a "tryout key"...their used at dealerships and their made for one kind of car (ford, chevy ect.) and certin models.

quote:

---

Originally posted by Mustard:
I want some of these keys but I don�t know if I can trust ya, this board by its nature is full of untrustworthy characters... But judging by the number keys bought I know that you can buy them from the site.

---

thats what i was talking about...

ow and those mesurments are wrong.
you are supposed to start measuring from 0, not from the first point of the ruler...

quote:

---

Originally posted by neur0t0xicity:
ow and those mesurments are wrong.
you are supposed to start measuring from 0, not from the first point of the ruler...

---

yes sir, you fucking moron...i know you do , thats why i corrected myself with that note , so fuck off if you dont like that shit , no one askd for your opinion..

ok i dont need to sell keys to make money i have the keys that is how i am making my money the only reason i am selling the keys is to save all of you some money if i was trying to make money on them i would not have drawn a picture of them the only reason i am charging money is for the time and gas money it takes to make copies and mail them off fuck thug he never sent me shit if ya want the keys email me for my address if not i dont really give a shit i have the keys (o ya that shit about the magnetic key is fucking stupid most tumblers in the lock are made out of brass and if you know any thing about metal brass is nonporous meaning it will not stick to a magnetic

i forgot crust i am still working on the mesurement i will have them done soon.

Hmm.. well i hope none of you try these on car lots. obvious reasons. GPS as well as the power locks they install on cars. unless you disassemble them first.

anyways im sure you guys knew this. Good luck with the key. you can always try and print it up and keep adjusting the phtoto in Paint Shop Pro until you get the exact demensions (By matching it up with a raw key) and then try and cut it that way. might take a few dozen tries but you might get it right. I think it beats trying to measure it.

what does a power lock have to do with taking cars , u can still use the keys with power locks...and power locks dont have tracking device on them..

For REAL tryout/masterkeys which are precision cut visit American Tolkey online at http://www.tolkey.com

I sent an e-mail for more ordering information so that I can send the guy or whoever it is a money order but the guy never returned my e-mail. I personally think He should post the mailing address of the place that we can send the money orders to. Also On REAL MASTER keys.Are there any for Nice cars like porche, Mercedes, Caddalac Escalade. Also does anybody have any information on car alarms, specifically how to disarm them. I know you can do it with palm pilots and calculators but they don't work anymore because of "Elusive Codes" Or "Rolling Codes". Which means when ever the owner arms or disarms the car alarm it always uses a different code so they don't work anymore. SO if you know of any places that would sell tools to help bypass some of these alarms I would be most greatful.

Tolkey? haha, what a fucking idiot!! Who wants to carry around 100's of keys? When you can have 1 "REAL MASTER KEY" thats factory made.
Yo Tolkey, get the fuck out of town with those prices!!

quote:

---

Originally posted by American Tolkey:
For REAL tryout/masterkeys which are precision cut visit American Tolkey online at http://www.tolkey.com

---

Actually the Tolkey keys would be better to have for this reason: You can create the actual key for the car from them. now you can "borrow" a particular person's car when they are out and return it with ease. no "jigglin" necessary like with the jiggle picks

hey,
i ordered a honda key and got it in the mail today. I tried it on my friends 98 accord and i cant get that shit to work! i anybody has any tips please reply or e-mail me
thanX
jdmhondaracer@aol.com

if you guys even do steal a car...what are you gonna do with it, drive around till your young looking faces get you arrested. don't tell me that you're gonna go to a chop shop cause they don't accept stuff from people they don't work with. they have their own guys that go out for them.

i want a key to a 73 chevy nova

Shit, I just wanted to post this, so I could like be the 100th person! That's soo abd ASS!

------------------
-@OsiriS@-
Homage to thee, O Osiris, the lord of eternity, the king of the gods, thou who hast many names, whose forms of coming into being are holy, whose attributes are hidden in the temples.

so what's the latest news with these key's? you all made me pretty interested in this. and to the dumb fuk talking about chop shops and other shit stfu! i just wanna get a civic si so i can get some shit off it. so do us all a favor and go back to blowing your mom. k? thnx has anyone had problems with stock alarms on these cars? or is there a way to make it like cancel or shut itself off since your using a real key? let me know peoples

------------------
..::Hades::..

My Honda key didn't work, has anybody had any problems with the honda keys

i have had hell with the honda and nissan keys they do work just not very easy i have got about one out of ten cars if any one has any pointers i need them to.

Just got my keys from "lumber jack boy" today. He did a great job of copying the keys. Received them in less than a week. I would not hesitate to buy from him again. Thanks "lumber jack boy"!

I just got my honda masterkey from carmasterkeys.com and i didn't test any cars yet is it hard to use? if i can get a couple of cars to start i might get a toyota one... is a toyota a good one to buy?

ok, i really hate sounding like a dumbshit but which key worked for chevys and jeeps, i think it was the dodge/chrysler key but i want to make sure i dont order the wrong one. and hey, does anyone know if they work for old vehicles? and do any work on fords?

the toyota key is kinda hard to use to the best one is the dodge key and yes the dodge key works on jeeps and chevy

Thanks lumberjack boy, I'll have to order one as soon as I can get a card number thats good.

Olywaanarchy
-"if voting changed the system, it would be illegal"

I received my dodge master keys today I tried them on a 95 ram i couldnt get em to work can someone please give me better directions than what came with the key??

-=linus=-

I'm pist I thought these were suppost to work good I can't get one toyota or honda open. CAN ANYONE HELP

i still have my dodge key

can it work on the newest chevys?

like the really expencive ones?

me and my friend my friend says he usually uses jiggler keys they work better thats what he said.. he was able to turn the honda key passenger and driver side but didn't do it all the way if u can till it turns thats all u need to kno it works.. i need to see bout these damn keys..

Hmmm...Can someone let me know which key to get and how exactly to use them in plain English?Im not sure if I should buy them...which one should I?And what is the best car to do it on?Thanks guys... nuonical@hotmail.com

well since i got the 10th email asking to buy my masterkey for cheep i made this site

http://www.fortunecity.com/tinpan/metallica/1182/

got my honda key on monday this week. i used it on 94,95,96 civics it worked on all, but i couldn't open any accords. i just jiggled it up and down and turned the key to the (right) driver-side and they opened within 5 seconds. haven't tried the passenger-side, no need since i opened the driver-side on all. had trouble with the trunks. and i got a question for all you that got honda keys, my honda key came uneven, as in one side was cut longer than the other, did any of your keys came like this? i had to get my key remade so each side of the key was even and after that everything worked

hey can u scan ur honda key and send me it... aznchopstickx@yahoo.com how did u jiggle it u tried drivers side? or passenger? e-mail me with some tips please.. mine didn't work on some civics.... im sorta mad too..

Yeah, Can someone Post some detailed instructions or maybe a list of cars that worked?That would kick @$$.

which one do you want me to scan? the uneven one or the even one? as for the keys step 1-put it in the door (keyhole) 2-move it up and down and while you do that twist it to the right if your on the driverside [left if your on the passenger] 3-get in and take whatever you want and take off(*STEALING IS WRONG*)=====for the iginition do the same shit but while you do all that you add one more step take the key and move it in and out about 1-2cm and then you got yourself a new car for the night(*STEALING IS WRONG*). and this if for you NUO the list of cars that i tried and the key worked is 94,95,96,and some 98 civics. i couldn't open the trunk on none of those. the cars that don't work is 94 accords and 92 accord wagons. and i also got a master key for the 87-90 accords and they work like a charm.

i forgot one more car that don't work is the 92 civic hatchbacks

i stuck it in a 92 civic seden.. i shook it up and down it didn't bundge.... well can u scan both the keys i want to compare it to mine.. so i want to know what sup.. i was really piss i wasted 25 bucks and it didn't work

cool, Ill get me some keys and try it.Ill let ya know when I get them and how they work, that would kick sooo much bootay if they do.How long does it take to open the door?Thanks again, yall have been really helpful.

yeah i stuck it in the 92 civic 2 door it didn't budge either i guess thats another car that the key dont work for. as for the scanned pics of the keys i'll get it up later today/tonight [11-12am cali time] when i get them back from my homie. it takes about 5 seconds at the most, but now its like 2-3 seconds for the door and another 2-3 seconds for the ignition and thats like 6 seconds and am out wit a new car. am also ordering the dodge/chrysler key from this foo', i'll tell yall bout it when i get my key next week

hmmm the 92 didn't seem that quick ok i'll test it on a prelude later... a 93 i believe my friend took my key so i have to get it back later... i need to make copies of this sucker 25 dollars isn't worth it i'll buy it for 5 =)