About
Community
Bad Ideas
Drugs
Ego
Erotica
Fringe
Society
Technology
register | bbs | search | rss | faq | about
meet up | add to del.icio.us | digg it
Go Back   Community > Vices > Better Living Through Chemistry
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Better Living Through Chemistry Discussions of any and all sorts of mind-warping chemicals, pills, booze, mind machines, trippy stuff, making beer, current street prices, importing pharmaceuticals, smart drugs, nutrients, herbs, and altered states. Please try to keep your conversations "theoretical" in nature, since this is an open conference.

Reply
 
Thread Tools Display Modes
 #1 
Old 2002-12-23, 02:38
one man riot one man riot is offline
Regular
 
Default Extracting THC from pipe resin

I have an average bowl, and i was wondering, about how much pipe/bowl resin do i actually need to do the thing with acetone and get a pretty high THC concentration? thanks
 #2 
Old 2002-12-23, 02:44
The_Scrub The_Scrub is offline
Regular
 
Default Re: Extracting THC from pipe resin

Most people don't smoke their resin until a drought comes up. And any other time than that is because you can't hit the pipe because the resin is blocking the airflow. A really small amount of resin is needed to get high due to the fact that it's so concentrated. But then again, don't be gay and scrap your pipe after every smokedown. Peace.
 #3 
Old 2002-12-23, 03:14
one man riot one man riot is offline
Regular
 
Default Re: Extracting THC from pipe resin

what exactly do i do once i have the resin scraped? sorry for the lame question
 #4 
Old 2002-12-23, 03:21
40ozTOfreedom 40ozTOfreedom is offline
Regular
 
Default Re: Extracting THC from pipe resin

smoke it.
 #5 
Old 2002-12-23, 08:36
CanDiC0ated CanDiC0ated is offline
Regular
 
Default Re: Extracting THC from pipe resin

If you have a water bong or sumthin with a glass tube connected to your bowl that you can detatch, you can smoke it by heating the tube with a lighter and puffing on the other side (like smokin crank). this can be done with some pipes too.

Luxie^
 #6 
Old 2002-12-23, 11:01
The pharmacist The pharmacist is offline
Regular
 
Default Re: Extracting THC from pipe resin

Don't use acetone to clean your pipes people. Acetone is a poisonous solvent, and I am pretty sure that if you use it to remove your resin, the resin will hold some of the acetone even after the acetone has evaporated. Some residue is almost certainly left behind, and when you go to smoke the resin, guess what. You are inhaling acetone, yeah. Instead of acetone, scrape your pipe with some type of tool if you want to smoke the resin. After you collect your resin, or if you just want to clean the pipe withou smoking, you can use grain alcohol to soak your piece. The reason you don't just soak it to get all the resin out, is because THC is alcohol soluable, and the alcohol will remove some of the resin, and consequentialy you will not get as high. Also, if you don't want to smoke the resin, you could let the resin sit in the grain alcohol for a few days, then strain out the resin, and drink the alcohol and get high.
 #7 
Old 2002-12-23, 14:38
kwikfish21 kwikfish21 is offline
Regular
 
Default Re: Extracting THC from pipe resin

You can get pretty high off resin, but in my experience smoking resin is just no where near as good as smoking weed. but its better tan being sober
 #8 
Old 2002-12-23, 16:35
GhettoJ GhettoJ is offline
Regular
 
Default Re: Extracting THC from pipe resin

quote:
Originally posted by The pharmacist:
Don't use acetone to clean your pipes people. Acetone is a poisonous solvent, and I am pretty sure that if you use it to remove your resin, the resin will hold some of the acetone even after the acetone has evaporated. Some residue is almost certainly left behind, and when you go to smoke the resin, guess what. You are inhaling acetone,


wrong when the acetone evaporates there is no more acetone
 #9 
Old 2002-12-23, 17:16
Sorryguysieatpussy Sorryguysieatpussy is offline
Regular
 
Default Re: Extracting THC from pipe resin

Don't bother, the resin will make the weed you smoke more powerfull anyways, so just keep it in there.
 #10 
Old 2002-12-23, 18:13
ballin on a budget ballin on a budget is offline
Regular
 
Default Re: Extracting THC from pipe resin

let the resin build up until theres a whole lot,then soak the piece in alchohol.use a toothpick or something to scrape it out into the alchohol bath.scrape out as much as you can.then evaporate the alchohol,and use the resin to either coat rolling papers in or coat your buds with it. or you could put some on a cigarette and smoke it. or if you wanna be a feind about it you can smoke it off aluminum foil like meth or heroin.
 #11 
Old 2002-12-24, 04:22
CRaZyAmishMaN CRaZyAmishMaN is offline
Regular
 
Default Re: Extracting THC from pipe resin

quote:
The reason you don't just soak it to get all the resin out, is because THC is alcohol soluable, and the alcohol will remove some of the resin, and consequentialy you will not get as high
hm. if you evaporate all of the alchohol you will be left with the same amount of THC.

scraping [glass] pipes is annoying!

soak it in alchohol [like ballin said] and evaporate the alchohol in the bottom of a styrofoam cup.
 #12 
Old 2002-12-24, 05:54
SisterCrystal SisterCrystal is offline
Regular
 
Default Re: Extracting THC from pipe resin

Scraping the resin with a metal tool is the most common way to get it out, but if you're really serious about yield you could do the alcohol thing (I recommend methanol over isopropanol). Just make sure all the alcohol has evaporated away before you smoke the residue. The easiest and least messy way to smoke resin is to use a piece of brillo to scrape the pipe, then just pop it in a crack pipe and smoke it just like you would crack.
 #13 
Old 2002-12-26, 02:06
Dangerousmind Dangerousmind is offline
Regular
 
Default Re: Extracting THC from pipe resin

the best thing to do with it is smoke it outta rolling paper.
 #14 
Old 2002-12-26, 02:58
2likestuff 2likestuff is offline
Regular
 
Default Re: Extracting THC from pipe resin

my heavy smoking friend actually collected a resin wad about the size of a golf ball. He used that when it was reaL dry
 #15 
Old 2002-12-26, 05:59
El Duderino El Duderino is offline
Regular
 
Default Re: Extracting THC from pipe resin

It's good to give yer pipe a cleanin once the resin starts to build up. I once half-filled a small tin with resin.

Bad thing about smokin it in a pipe (esp. mine which gets blocked real easy) is when yer tokin, and it gets blocked so you suck really hard and ya get hot rocks.
 
To the best of our knowledge, the text on this page may be freely reproduced and distributed.
 

totse.com certificate signatures
 
 
About | Community | Bad Ideas | Drugs | Ego | Erotica | Fringe | Society | Technology
Hot Topics