Well I have seen a CR setup before but never paid a hole lot of attention to it but, I dont recall it looking too much like this setup. Me and my buddie were wondering if we should give this a try. Have any of you guys ever tired it, if you have how did it go?

methheads pushpull setup is by far the best way for a newbee to easily and quickly make methamphetamine. With little odor and quick results i would reccomend it.

Ive been hearing there were problems with that method - have all the bugs been worked out of it and is there an updated version of it somewhere? Can someone post that link again or refer me to the original posts on this board that cover this. thanx

Cool I give it a try, but if there is any flaws that you know about I would sure appreceiate if you would let me know.

thanks

http://www.angelfire.com/mi3/krystalklean/index.html

GET SOME PICTURES,

I would be quite suspicious of the cleaning method for the pills. Try using a cold methanol extract, followed by solvent wash, then A/B.

Also, the ratios for RP are way in the minimum range. .3 rp for a push pull will be a very stilted rxn. Try .5 for a start, and maintain another .25 RP in reserve.

The Iodine ratio is for lab grade. If you make your own, try about 10-15% more than called for.

C.

The RP ratio will be dependant on the size of your reaction. .3 will be fine for anything over an oz. For smaller reactions, do as my friend (the real M_C) says and go with .5, and more for matchbook RP.