About
Community
Bad Ideas
Drugs
Ego
Erotica
Fringe
Society
Technology
register | bbs | search | rss | faq | about
meet up | add to del.icio.us | digg it
Go Back   Community > Technology > Technophiliacs & Technophiles
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Technophiliacs & Technophiles The Technophiliacs forum is for discussing any and all forms of tech and other types of social backwardness. Including discussions of strange home-brewed hardware technology. Where to get good tools. How to make fiberglass molds. Computer hardware and software technolgy, including operating systems, applications, networking, hardware, CPU's, disk drives, and other geeky things. Viruses and Artificial Life discussions. End user tools discussions and support issues. Gating the Internet with other nets.

Reply
 
Thread Tools Display Modes
 #1 
Old 2008-12-28, 19:25
starjones starjones is offline
Regular
 
Default is it possible to make a light that responds to sound?

like a light for a concert that can sense the intensity level of the music and become brighter and dimmer depending on the intensity?

and it would correspond to the music played

i know they can program light shows, but do they have just like... lamps or something that can do this?

it would be cool if it could sense your foot steps and when you set stuff down.

it would be trippy as fuck if you were on drugs

it would seem as if the whole room was responding to your every action
 #2 
Old 2008-12-28, 23:34
Lundmark Lundmark is offline
Regular
 
Default Re: is it possible to make a light that responds to sound?

http://www.escience.ca/hobby/RENDER/0001/C9/3043/13055.html
 #3 
Old 2008-12-29, 01:18
KeepOnTruckin KeepOnTruckin is offline
Regular
 
Default Re: is it possible to make a light that responds to sound?

I had a rope light controller that had a microphone and flashed the rope lights to any sound input.

Of course, as a person who does rock concert lighting, i'd say get a lighting console and dimmers and some par cans and have a real light show
 #4 
Old 2008-12-29, 11:00
beatmeofficer beatmeofficer is offline
Regular
 
Default Re: is it possible to make a light that responds to sound?

http://www.afrotechmods.com/reallycheap/ghett-oh/ghett-oh.htm

Replace the dildo+vibrator part with lights.
 #5 
Old 2008-12-29, 12:55
Aragami Aragami is offline
Regular
 
Default Re: is it possible to make a light that responds to sound?

You need a lighting controller that has a light to sound function, also known as a bass step. It's pretty common on most boards. You'll need a patch bay to go along with that, then you plug the power of all your lights into the patch bay, patch that all to the controller, and engage the LTS.

For the board and patch bay, expect to pay close to $2k. Some boards do have a patch inbuilt, like the Jands 4 Pak.

Err, you'll need to program a chase or similar before you do anything with light -> sound.
 #6 
Old 2008-12-29, 16:31
zuperxtreme zuperxtreme is offline
Regular
 
Default Re: is it possible to make a light that responds to sound?

Not hard:

http://www.youtube.com/watch?v=heUJCH6c1zo
 #7 
Old 2008-12-29, 16:51
Super Moderator
 
In a nuclear crater
Default Re: is it possible to make a light that responds to sound?

Quote:
Originally Posted by Aragami
You need a lighting controller that has a light to sound function, also known as a bass step. It's pretty common on most boards. You'll need a patch bay to go along with that, then you plug the power of all your lights into the patch bay, patch that all to the controller, and engage the LTS.

For the board and patch bay, expect to pay close to $2k. Some boards do have a patch inbuilt, like the Jands 4 Pak.

Err, you'll need to program a chase or similar before you do anything with light -> sound.


I've heard of it being done with just spotlights and a PA amplifier. The microphone goes to the PA amp, which goes to cables to the spotlights. Not exactly the best way of doing it, but it's cheap -- the PA amp is probably $150, and the spotlights are cheap and readily available in your local hardware store.
 #8 
Old 2008-12-30, 05:57
Regular
 
full of win
Default Re: is it possible to make a light that responds to sound?

I got this cool color lamp thing when I was a kid that responds to sound. It's this lamp thing that projects on a wall or ceiling and changes color and flashes and has different settings and shit, and you can set it to be sound responsive. It's pretty cool.

I gotta break that thing out when I'm really ridiculously blazed sometime.
 
To the best of our knowledge, the text on this page may be freely reproduced and distributed.
 

totse.com certificate signatures
 
 
About | Community | Bad Ideas | Drugs | Ego | Erotica | Fringe | Society | Technology
Hot Topics