Well I boke a bolt... How do I get it out?
The angle is too ackward to drill it straight through, from both sides...
Pics..

http://img512.imageshack.us/img512/5845/mini06122008068ku9.jpg
http://img512.imageshack.us/img512/149/mini06122008067sl8.jpg
http://img512.imageshack.us/img512/4664/mini06122008066lh8.jpg
http://img512.imageshack.us/img512/2615/mini06122008065xq6.jpg

Anything I can do? Or should I just fuck it and take it to the shop?

That second pic makes it look like you could just stick a wrench up in there and unscrew it.

Failing that, it looks like you have enough room to get a sawzall or a cutting wheel on it.

The nut's welded on to the axle. I don't particularly want to cut it off. Just want to get the broken bolt bit out of it.

Ah, I see. Well, drill it and get an extractor in there, otherwise you'll have to cut it out.

is it incredibly tight?

if it isnt maybe you could get a centre punch and hammer and tap it out

And destroy the thread on the nut!

That's what tap and die sets are for.

pretty awkward spot though, isn't it?

That's what tap and die sets are for.

Hey man is Temple dead?

From those images it looks quite accessible with a drill, but then again I'm not the one under the vehicle.
Can you get access to an angled chuck extension?
http://slipperlaunch.net/Photos%20for%20Web/PICT1359w.jpg
Its saved me a few times drilling in restricted places.