If you have a bill piece and a grinder you can make fucking decent hash from your kief and the resin in your bill.

http://i35.tinypic.com/1uko.jpghttp://i33.tinypic.com/29l05eh.jpg

Those are both the same piece, it is 0.6 grams. I took the pictures with a scanner so I could not show it on a scale.

That hash is from 100% recycled marijuana. It has a really nice mellow high and its just as potent as real hash. Its hard as a rock at room temperature and it becomes like putty in your hand. I mainly use it for brewing (see:http://tinyurl.com/3wt6xz) and it lasts a very long time. Its not very good in bowls though. Basically when I buy weed its as if Im getting a little bit of hash too for free. None of my friends suspect that its made from custy resin until I tell them.

All you do it take a clogged bill piece and wait until its more or less dry of bong water. You can dry it faster by holding the bottom of the stem over a lighter. Then you scrape everything out of hit into some sort of receptacle. You can use any thing to scrape it, like a paperclick or a bobby pin or even a clothes hanger. You will probably need a pocket knife or something like that to scrape out the bowl, which is the best part because its the most dense and its always completely dry. I use a plastic container from cough losenges to hold the resin scrapings. Then you either wait until this is dry on its own which can be from 1 to 2 days. Or you can dry it faster by folding piece of paper and puting all of it in the paper, then holding a lighter or a candle along the other side of the paper. Letting it dry on its own usually works better and is alot safer. I made huge mess of burned paper ash on my carpet yesterday by accident drying resin like this.

Now that you have dried resin scrap most people who scrape resin usually smoke it like this which is fucking disgusting, but if you keep do this you make bomb hash like I have in the picture. Take a pocket knife and start mashing the resin together into one big piece. This can be the hardest part because its very sticky and alot of this will get on your fingers and on surrounding objects. So much that you can actually lose most of the resin. This is why it is important that it is properly dry but not too dry that it wont stick together. Easy ways of pressing it are by breaking an old bus card or credit card or anything like that in half and then squishing it inbetween the two halves. Doing this will squeeze out most of the remaining water if there is any. You will know you have pressed it enough when you can squeeze it in your fingers without it coming apart and sticking in your skin. You should be able to shape it. Now you can put it in the freezer for like 5 minutes.

Squish your ball of resin into a little flat disk. This can be difficult for a minute if you just took if from the freezer. Then take a grinder if you have on and get all the kief out if it that you can. If have weed you can even grind it and shake it around just to get kief. If you pile your weed on a table or scale it then loads of kief with just fall and remain on the surface of the scale or table. If you keep it in a container you can just sweep it off the side of the container. Pick up all the kief you collect directly with your flat piece of hash and then fold it over so that the kief is totally surrounded inside. Then squish it around so that it is uniformly mixed. Congratulations you are done.

You may need to repeat these steps many times before you have a significant amount of hash so save up your resin and keif. Also I find it is nicer when you smoke alot of batch in your weed, because the batch affects the resin also. If you do this properly then what you end up with is a very nice piece of hash and its not at all stinky or gross like it seems in your bill.

http://i35.tinypic.com/1uko.jpghttp://i33.tinypic.com/29l05eh.jpg

Those are both the same piece, it is 0.6 grams. I took the pictures with a scanner so I could not show it on a scale.

That hash is from 100% recycled marijuana ...

... Now that you have dried resin scrap most people who scrape resin usually smoke it like this which is fucking disgusting, but if you keep do this you make bomb hash like I have in the picture. Take a pocket knife and start mashing the resin together into one big piece. This can be the hardest part because its very sticky and alot of this will get on your fingers and on surrounding objects. So much that you can actually lose most of the resin. This is why it is important that it is properly dry but not too dry that it wont stick together. Easy ways of pressing it are by breaking an old bus card or credit card or anything like that in half and then squishing it inbetween the two halves. Doing this will squeeze out most of the remaining water if there is any. You will know you have pressed it enough when you can squeeze it in your fingers without it coming apart and sticking in your skin. You should be able to shape it. Now you can put it in the freezer for like 5 minutes.

Squish your ball of resin into a little flat disk. This can be difficult for a minute if you just took if from the freezer. Then take a grinder if you have on and get all the kief out if it that you can. If have weed you can even grind it and shake it around just to get kief. If you pile your weed on a table or scale it then loads of kief with just fall and remain on the surface of the scale or table. If you keep it in a container you can just sweep it off the side of the container. Pick up all the kief you collect directly with your flat piece of hash and then fold it over so that the kief is totally surrounded inside. Then squish it around so that it is uniformly mixed. Congratulations you are done.

That is not hash.

That is compressed resin with keif added to it.

How is this any less disgusting then smoking freshly scraped resin? You aren't cleaning it up at all, just drying it up and compressing it, and adding keif if you happen to have any.

That sounds like a ball of resin to me.

That is not hash.

That is compressed resin with keif added to it.

How is this any less disgusting then smoking freshly scraped resin? You aren't cleaning it up at all, just drying it up and compressing it, and adding keif if you happen to have any.

That sounds like a ball of resin to me.

It doesnt taste like resin or smell like resin when its dry. If you put in enough keif it tastes like weed and it gets you very high. I smoke my friends with this and they never know the difference.

It doesnt taste like resin or smell like resin when its dry. If you put in enough keif it tastes like weed and it gets you very high. I smoke my friends with this and they never know the difference.

Great. You've found a way to make smoking resin a little nicer.

It is not hash though. It's not even cleaned.

Great. You've found a way to make smoking resin a little nicer.

It is not hash though. It's not even cleaned.

Kinda nasty.

Op - are you that hellbent on saving what, a couple of bucks? Resin as a whole is pretty nasty.

Great. You've found a way to make smoking resin a little nicer.

It is not hash though. It's not even cleaned.

Fine whatever its not hash I apologize for my semantics.

Kinda nasty.

Op - are you that hellbent on saving what, a couple of bucks? Resin as a whole is pretty nasty.

I enjoy smoking this, you need to see it in person to know that its not like just smoking resin

I smoke my friends with this and they never know the difference.

are they all blind? or just fuckin retards? they cant tell the difference between that and some nugs/keif???

Fine whatever its not hash I apologize for my semantics.

No need to feel bent out of shape. I don't mind a little resin occasionally myself when I'm short on weed.

I just think if you go around telling people it's hash, this might cause problems for you (like being ridiculed by your fellow totseans for calling resin hash).

it would be closer to hash if you collected a shit ton of resin, disolve it in some alcohol... filter through a coffee filter or hell even a folded paper towel. the idea is to get all of the tar and ash out of it, you should be left with a liquid which will probably be more light amber than black... evaporate this off, scrape, mix this with keif.... the keif is really not completly necessary but it will make it into a more workable product....

at least do something to clean resin up if your going to smoke it, for the most part its just tar and ash, seriously extract the thc out of it with alcohol and see how little you end up with, but hey you wont need much, try something around the size of a match head...

Fuck that, just buy real hash.....

No western hash can ever compare to the real stuff; it's stronger and stuff, it's just not as good. Hash grown up in the mountains on the other side of the world is always gona just be way more an... interesting smoke than some kief you've pressed, if it's good.

Got some lush Afghani at the moment, it's almost as good as the stuff I was smoking in Nepal... temple balls. Worth the money I reckon...

Believe me, doing something like this can get you EXTREMELY fucked. A while ago my buddy's glass bong broke, and scraped up all the resin from it, and he only smoked the best weed out of it too. Then I had the very lucky chance to try it, I took like 5 hits, smoked a cigarette, stood up, and ended up passing/blacking out for a little bit. I came to when I tried to sit down and ended up hitting my head on his gravel driveway, heh-heh. I was very fucked up for a pretty long time (nothing insane, just seemed longer then usual, plus we were doing some pills on top of that, so yea).

But yea, what's the point of wasting your resin when you can use it? I get why some of you guys are giving the OP shit for calling it hash however.

yea... we don't get any hash around these parts.... plenty of bud, everything from shwag to headies but no hash to speak of...

Nothing new or revolutionary, but well written at least.

Question: is THC (and other cannabinoids) soluble in tolulene? I have neither alcohol nor acetone, so I am looking for alterenatives.

OP I'd smoke it

Good work

I think everyone in this thread would smoke it, we just like to critisize.

If you say you wouldn't smoke it at all, you are fucking dumb.

I think everyone in this thread would smoke it, we just like to critisize.

If you say you wouldn't smoke it at all, you are fucking dumb.

i wouldn't.

personally, i hate resin.

just get 10 dollars and smoke weed.

so what would be a good detailed guide on makin actual hash?

Why the hell would I scrape out my pipe when I have a pound of weed sitting in my freezer waiting for me to smoke it?

GO down to your local shoopers fucking drug mart and buy some iso for 3$ instead of fucking around with poisonous bull shit you fucking moron.

that is disgusting. it looks like cat shit

you fucking nasty ass shiteating stoners

Your so fucking dumb

Your so fucking dumb

my stupidity reflects my awesome use of drugs

so get the fuck out you stupid noob

go smoke your catshit

you can use your high to think about all the good drugs youll get someday

GO down to your local shoopers fucking drug mart and buy some iso for 3$ instead of fucking around with poisonous bull shit you fucking moron.

You are the fucking moron. You are obviously to retarded to safely handle chemicals, so your opinion is invalid.

So can anybody with at least two brain cells to rub together answer my question?

You are the fucking moron. You are obviously to retarded to safely handle chemicals, so your opinion is invalid.

So can anybody with at least two brain cells to rub together answer my question?

it should work, toluene is non polar....

make sure it evaporates cleanly before using it as a solvent....

honestly though 90% iso will work.... if your just extracting THC from bud, look at butane honey oil.... probably the fastest way once you get ahold of a pvc pipe, 2 end caps, bud, butane, and a drill....

it should work, toluene is non polar....

make sure it evaporates cleanly before using it as a solvent....

honestly though 90% iso will work.... if your just extracting THC from bud, look at butane honey oil.... probably the fastest way once you get ahold of a pvc pipe, 2 end caps, bud, butane, and a drill....

Thanks.

Im actually looking at extracting it from resin, as this thread inspired me to do something more with all my res.

i'd smoke that shit any day. but i bet it takes ALOT of weed smoked to get that big of a ball. SHIT.

so chances are i'd just scrape it normally, get a buzz for that day, and the next day, i'd for sure have at LEAST the 5$ to go down half on a dime. even if i had to steal quarters.

i do something kinda like this and was actually going to make a post on it. the only difference is i dont add resin. only kief in my hash. an i use a over priced toy called a pollen press.


but other than that i salute you an your frugal ways. to all the haters, why dont you go to a GOP rally?