So...I've been trying the whole IV route. I generally snort about 60-80mg oxycodone to get a good buzz. I shot a blue 30mg roxicodone twice (on separate occasions) and was quite disappointed. No rush really, just a small groove.

I would crush the pills and add about 40 units of water. I'd insert this solution into a syringe that had a piece of cotton in the bottom of it. I'd plunger it down and squirt it into the syringe that would be for injection. I'd do this once more...and I'd end up with ~70-80 units. I tried my "big vein" by the elbow first and then the one that runs kind of diagonally across the forearm. I drew blood...and shot.

Did I do anything wrong? Should I up my dose? I'm assuming I didn't do enough, but I'd hate to find out later that I'm doing something wrong.

If you usually shoot 80, and now you shot 30.

FYI tollerance is a bitch.

Note:
About 100mg ideally should dissolve in a gram of water 1cc...

What kind of rig are you using?
Do you heat the water up?

If you usually shoot 80, and now you shot 30.

FYI tollerance is a bitch.


he said he usually snorts 80. and shot 30.

and yes, tolerance sucks.

I'm using 100 unit short needle insulin syringes.

Was I supposed to heat the water up? If so, it seems people like to leave that part out...I didn't want to degrade the medicine.

Best wait for someone experienced to answer your question, im going to withhold suggestions...and what not.


The fact that i reply to question like these is because these threads/topics accentuate that seed of temptation, of me trying out to shoot some opes, it's unsettling....

I know you're on right now, Stupid Noob....you can help me.

Surely somebody has something to say on this topic.

I.V it into your nutsack, then perform auto-fellatio.

well ive never IV'ed roxi but I've IVD fent, H, oxy, morphine and about anything else you can fit into a needle...It sounds to me IMO your not doing enough? Like I can snort a 40mg oc and feel pretty ok...but if I iv 40 I dont really feel it all that well...its weird...or I will feel it pretty good for about 5 min then it just feels a little tickly if you know what I mean...also like someone else asked? are you heating the water? Use like 1 cap full or so of water maybe 2...heat it up I would say .... ive heard you dont have to heat OCs but I like to get mine warm so I am not doing a cold shot...

your water-dope ratio might be a little too much water with not enough dope...up it to about 50 or so and see if that does anything...remember you can always add more but you cant take it away...so if 50ish doesnt do a lot wait a while and add more..

I dunno if roxi has an outer coating but if so be sure to get rid of that before you shoot..

I went through the whole first page and saw nothing of real help so here it goes...

Firstly take the OC 80 and lick off the outside wax stuff, some people say this is the time release other don't, I don't know. What I do know is it makes it easier to shoot if this waxy stuff doesn't get mixed in your water.

Crush up the pill and shoot one whole syringe (or less if you get better at it) into a spoon with the pill powder. Heat for a few seconds with some kind of flame, throw the cotton in (I would use sterile cotton or something better) and pull through syringe. For risk of infection I would recommend using a solution of 90% isopropyl alcohol on the place you intend to shoot beforehand and I personally would not re-use syringes even if YOU only used it once, this decreases risk of infection as well. If you really want to use something that will get rid of all the bacteria on your arm use betadine hydrochloride, that's the brown stuff they put on your arm before you get a shot.

The hardest part to shooting is the shooting action itself and it takes time to get good at this so you hit a vein every time. Of course if you shoot a lot it's going to be harder. For someone of your tolerance I would suggest using 40-60mg OC for a first-time shot and assess your tolerance from there.

Stay safe,
Bos

Thanks for your reply.

How big of a piece of cotton should I use? I'd imagine no bigger than a q-tip sized piece.

Will just one pull be enough? Is it worth saving the leftover pill mass to combine with others on a rainy day?

Sorry if I'm being a pest, but the shit is like $.75/mg or so here. I hate to waste my pills.

Sorry if I'm being a pest, but the shit is like $.75/mg or so here. I hate to waste my pills.

better than the 1 to 1.5/mg where I am.

better than the 1 to 1.5/mg where I am.

I pity the man who pays $120 for a single oxy.

No shit ^

Just got an 80mg for 40 tonight

No don't save the pill, after you got all your water out of your spoon I would just eat what's left on the spoon. The majority of what's left is going to be cutter and fillers anyway and to keep that on the spoon is just ridiculous; I would even put a lighter to a clean spoon before I ever used it, as you do with a needle to get a splinter out, to further sterilize it. One pull should be enough, if not and you have room left in your syringe you can try it again but most of the times this is messy and not necessary. I would use sterile cotton and just cut off a piece about the size that you say, as you get better you're going to use less and less cotton and the majority of your waste is going to be concentrated in the left-over cotton. You might want to pop the cotton in your mouth and suck out all your OC before throwing it out.

Stay safe,
Bos

I.V it into your nutsack, then perform auto-fellatio.
Show some respect asshole, squeegee IS better than you.


Squeegee man, next time make sure to let your shit stir up and mix well before filtering, make sure you have no waxes or shit in that kind of pill, maybe do a double extraction, combine and reduce the volume to a workable amount.


The main problem I run into with this kind of thing is folks don't let the shit extract into the water enough before filtering.

follow SN's advice before upping your dose, but you might run into compared to other opiates oxycodone does not have much gain by sticking it in the mainline...

Thanks for all your help, guys. I'm gonna space things out...so it might be another week or so until I try again. Tabs are way easier to find than contins anyway.

Oh, and thanks for your kind words, SN. It's nice to be backed up every once in a while :)

I believe heating is not necessary, Oxy will degrade at a pretty low temperature... as long as you have enough water to disolve it it doesn't need to be heated...

If your worried about killing off bacteria or whatever, i would suggest a wheel filter which will get out much more of the binders and whatnot, a small enough micron filter will catch bacteria...

but take the things i say in regard to IV use with a grain of salt, i don't shoot so i can only go on what ive read and heard...

Heating the water is not only about disinfection of your solution...Heating water makes the solubility rate of most substances increase...

I dont know if this has been said but if you are tying off, you get a better rush if you hit your vein, untie and then plunge. I would go for 40-50mg for a decent little rush and i need a full 80 to the dome to get off when sniffin