totse.com | Any ATM skimmers here?

purplecheeser · #1 2008-07-16, 03:13

anyone here ATM skim. Im pretty interested in it.

Kulsh123 · #2 2008-07-16, 03:14

Quote:

Originally Posted by purplecheeser View Post

anyone here ATM skim. Im pretty interested in it.

Yes and No. Find me on Pidgin + OTR or send me your email via aim.

SockMan · #3 2008-07-16, 06:08

You guys actually get away with this shit? I wanna try it!

Kulsh123 · #4 2008-07-16, 06:09

Quote:

Originally Posted by SockMan View Post

You guys actually get away with this shit? I wanna try it!

Go buy an ATM skimmer. Stick it on an ATM.

SockMan · #5 2008-07-16, 06:43

Quote:

Originally Posted by Kulsh123 View Post

Go buy an ATM skimmer. Stick it on an ATM.

Wow! Thats so soooo risky. I'd be such a bad ass if I've done that.

BAD MAN · #6 2008-07-16, 07:09

No, No one is selling ATM skimmers anymore, better of to make your own.

You'll need a mini123 reader, some mold, and clay, I suggest you get the aluminum starter kit for the mold and clay (I got mine at http://www.alumilite.com/checkout/pr...products_id=49}, some sand paper and spray paint. Well all you do is get the clay and put it on the ATM you want to make the skimmer for. Then you just go home, use the mold and resin it, disasemble the mini123 and adjust it the head to the ATM besel you just built. Meh.....I can't really explain it good, but if your serious just hit me up and I'll help you out, its not that easy.

You will need some common sense and common knowledge about what your doing, so just cuz u saw the real hustle doesn't mean you can easily start skimming, go research nigger.

I made my own and its not that bad, I don't have the pinpad and all. But however I decided to buy one instead much much professional. Yeah I know a seller but he's not taking any new people

Kulsh123 · #7 2008-07-16, 07:57

Quote:

Originally Posted by BAD MAN View Post

No, No one is selling ATM skimmers anymore, better of to make your own.

You'll need a mini123 reader, some mold, and clay, I suggest you get the aluminum starter kit for the mold and clay (I got mine at http://www.alumilite.com/checkout/pr...products_id=49}, some sand paper and spray paint. Well all you do is get the clay and put it on the ATM you want to make the skimmer for. Then you just go home, use the mold and resin it, disasemble the mini123 and adjust it the head to the ATM besel you just built. Meh.....I can't really explain it good, but if your serious just hit me up and I'll help you out, its not that easy.

You will need some common sense and common knowledge about what your doing, so just cuz u saw the real hustle doesn't mean you can easily start skimming, go research nigger.

I made my own and its not that bad, I don't have the pinpad and all. But however I decided to buy one instead much much professional. Yeah I know a seller but he's not taking any new people

^Listen to him

slim-ov-derby · #8 2008-07-16, 07:57

Why bother skimming ATMs when you can just shoulder peek for pin and pickpocket the card later (there are switcharoo methods as well, one was shown on TRH and it was actually not a bad idea compared to some other misinformed stuff on that show. Works brilliantly if you have a lot of old stolen credit cards [why you should keep CCs even when they get cancelled]).

Skimming works best under and behind the counter (not literally). Get a job some place you're going to be handling a lot of cards such as a waiter or in clothing retail. You'll get just as many if not more dumps by doing this, and it's less risky.

BAD MAN is right on making the skimmer. In fact I sill think I have a textfile saved on making an ATM skimmer.

Yep I have...

Quote:

Credit goes to watermelon for putting this up on CZ and of course as always to whoever wrote it.

I DID NOT WRITE THEM, AND I DON'T TAKE CREDIT FOR THEM.

These instructions are very good. I even have an extra Allumilite Kit for sale if anybody has trouble finding them.

Granted you're results will be nowhere near as fantastic as Dron's product.

It still proves it's possible to make something from almost nothing.

::::::::::::::::::::::::::

You will need a
dremel

msr 500m ht#p://www.msrfactory.com/msr500mwebsite.htm

Aluminite Starter Kit ht#p://www.alumilite.com/checkout/product_info.php?cPath=26&products_id=49

pcmetal putty ht#p://www.pcepoxy.com/puttyepoxies/pcmetal.asp

Fine grade sandpaper

Spray paint

Depending on the type of skimmer you may need minor additional products to replica the unit.

First thing you would need is to identify the type of skimmer you want to make.

Preferable choose one that is common in your area.

Once you had the type you need to obtain a copy of the original reader that your skimmer will be covering.

There are two ways to do this. You can either buy it as a replacement part online or make a copy.

To make a copy, open your aluminite starter kit and you will find clay bars.
Combine the bars into one.

Go the atm and firmly press the clay onto reader.
Pull it off gently and you should have a impression of the reader.
Take it home and use the resin mixture from your starter kit
to make a copy of the atms reader.
It dries hard in under 3 minutes.
You should now have at this point a replica of your targets reader.
You may want to lightly spray wd40 before appling the clay to insure
that you dont leave clay residue.
Just be sure to wipe it clean after.
Its best to do this very late at night to ensure no prying eyes.

Now that you have the replica of the reader.
Disasemble the msr500 completely out of its housing.
You will see that it is very simplistic in design.
The key part to making a skimmer is the position of the reader.
It must be in the correct position to read the cards properly.
So depending on the design dremel the head enclosure to as small as possible.

The metal brackets holding it in, is to ensure the reader has movement
to allow the card access to proceed past the head.
the smaller the better.

Use the pcmetal putty to accommodate for the necessary dremeled brackets.

Once your at this stage, You need to design your skimmer .

Place your msr500 parts where it best fits ontop of the replica reader.
It good to place it in such a way that you can have access to turn it on and off.
I use a toothpick to ensure a channel to the on off switch.
Apply one layer of suran wrap over your replica reader and msr parts,
this is to ensure the clay does not stick to it.
Start placing the clay from your starter kit on top of the suran wrap
in such a way to mimic the design of the orginal reader enclosure.
The readers are very basic and clay is very pliable,
so it should be rather easy to replicate a design.
make sure that everything is flat and smooth.
I use cards to ensure smooth lines and flat surfaces.
once you are happy with your design, gently lift off the clay.
You should have at this point a clay representation of your skimmer.
Use your starter kit and follow the directions on how to make mold.
From the mold make a resin unit.
Place your msr500 parts into the unit the same way you had them layed out
on top of the original reader.
Use the pcmetal putty as needed to secure the parts
into the unit.
Next, sandpaper the rough edges and spray paint the unit the color to match the atm.
Your ready to test at this stage. Once you have sucessfully tested to ensure your skimmer lines up perfectly with the atm your ready to go . Use the pcmetal to create a good bond with the atm. it makes it hard to get off. Even if you break it, taking it off. You still have the molds to make another.

Optionryder420 · #9 2008-07-16, 10:53

[quote=BAD MAN;10228389]No, No one is selling ATM skimmers anymore, better of to make your own.

/QUOTE]

Last I checked, IRC was still around.

BAD MAN · #10 2008-07-16, 12:14

[quote=Optionryder420;10228894]

Quote:

Originally Posted by BAD MAN View Post

No, No one is selling ATM skimmers anymore, better of to make your own.

/QUOTE]

Last I checked, IRC was still around.

LMFAO, are you serious?

kev19x · #11 2008-07-17, 22:22

Quote:

Originally Posted by Kulsh123 View Post

Yes and No. Find me on Pidgin + OTR or send me your email via aim.

Don't trust this dude.He'll try to scam you.

slim-ov-derby · #12 2008-07-17, 22:47

Quote:

Originally Posted by kev19x View Post

Don't trust this dude.He'll try to scam you.

There's no honour amongst thieves nigga, what the fuck were you expecting?

Kulsh is actually a pretty smart guy from what I've seen so far (haven't had time to talk to him properly yet though), but yeah like with any other scammer I'd never do business with them; so it's nothing personal.

I didn't agree with him suggesting someone to rip someone in IRC with dumps but hey it ain't happening to me so why should I care?

deeperndeeper · #13 2008-07-18, 00:56

Quote:

Originally Posted by slim-ov-derby View Post

There's no honour amongst thieves nigga, what the fuck were you expecting?

Kulsh is actually a pretty smart guy from what I've seen so far (haven't had time to talk to him properly yet though), but yeah like with any other scammer I'd never do business with them; so it's nothing personal.

I didn't agree with him suggesting someone to rip someone in IRC with dumps but hey it ain't happening to me so why should I care?

kulsh123 is an emo retard .He tried to scam me too, he's not that good at it.

slim-ov-derby · #14 2008-07-18, 01:07

Why what'd he try to do?

Happen to have anything to do with that WU bug shit?