|
|
 |
|
|
|
register |
bbs |
search |
rss |
faq |
about
|
|
|
meet up |
add to del.icio.us |
digg it
|
|
|
| Backyard Ballistics This forum is dedicated to the safe teaching and responsible handling of high and low explosives. You will not find any information on how to make "bombs" or any such device(s) . Backyard ballistics will teach you the science and the art of pyrotechnics and how to manufacture and use explosives/pyrotechnics safely and responsibly. Backyard ballistics is also a haven for rocketry and pneumatic cannons. All information contained within this forum is for educational purposes ONLY. Totse does not accept responsiblity for any incident involving the use of the information contained within this forum. |
 |
|
|
#1
 2008-06-07, 18:45 |
|
|
 disarming an APAN charge?
205g APAN in a 4" pcv pipe with plexiglass sheets superglued on each end. need to disarm it safely in a way other than detonating it for really stupid reasons. my plan was just dissolve the end cap off with acetone and pour it all out into room temp water. sound reasonable?
|
|
#2
2008-06-08, 13:34 |
kiknet 
Regular
|
|
|
|
Re: disarming an APAN charge?
why cant you det it?
|
|
#3
2008-06-08, 22:00 |
asilentbob
Regular
|
|
|
|
Re: disarming an APAN charge?
I seriously doubt that acetone is going to eat through even a thin layer of plexiglass in any reasonable amount of time.
This is why you use paper... if it goes bad you just soak it in water or some other solvent... let the paper lose its glue and fall apart...
|
|
#4
2008-06-09, 00:04 |
|
Moderator
|
|
directly over the center of th
|
|
Re: disarming an APAN charge?
why the fuck would you make somthing you would not use....
drill a small hole with a hand drill and then go from there
|
|
#5
2008-06-10, 19:04 |
Chainhit
Regular
|
|
|
|
Re: disarming an APAN charge?
I would say, get a shovel and start digging. Drilling something made of AP seems like a retarded idea to me. Acetone idea is alright, but i dont know if it will work quick enough. I say you dig a hole, thats like 6 feet deep, and det it in there, no noise problem/etc.
The thing about drilling is that it slowly sublimes, I would not risk it.
|
|
#6
2008-06-10, 19:13 |
Ljudska
Regular
|
|
|
|
Re: disarming an APAN charge?
drill a small hole with a hand drill and then go from there
good job on weeding the noobs out of the forum ;)
|
|
#7
2008-06-11, 16:09 |
kiknet
Regular
|
|
|
|
Re: disarming an APAN charge?
Quote:
|
Originally Posted by Chainhit
I would say, get a shovel and start digging. Drilling something made of AP seems like a retarded idea to me. Acetone idea is alright, but i dont know if it will work quick enough. I say you dig a hole, thats like 6 feet deep, and det it in there, no noise problem/etc.
The thing about drilling is that it slowly sublimes, I would not risk it.
|
This is what I was going to recommend, if your current device doesn't have a working fuse, then i would suggest another 100g charge placed in direct contact with it in the hole. |
|
#8
2008-06-11, 19:37 |
|
Moderator
|
|
I live in Heresy
|
|
Re: disarming an APAN charge?
No large bodies of water around? How about a cliff?
AP does degrade, but not very fast if enclosed in a pipe.
|
|
|
|
To the best of our knowledge, the text on this page may be freely reproduced and distributed.
totse.com certificate signatures
|
|
|
About | Community | Bad Ideas | Drugs | Ego | Erotica | Fringe | Society | Technology
|
|
|
|
|
|
![]()
![]()
|
