totse.com | A present from me to you: Rocket Simulation software

warweed12 · #1 2007-05-05, 07:00

I have finally bought and packaged Rocksim 8.01 which is the rocket simulation software i used in the horizontal rocket project you honestly can do EVERYTHING with this .. if you can not figure out how to sime a rocket of your choice let me know i will show you how i have built and simed all my rockets here they will tell you how to improve it and show you 3D models of it as you build it you can cluster build custom parts you can do anythign really I have included alot of RCK files with it these are designs of common rockets out there in kits ..

To be honest im not going to show pics or describe it's awesomeness in detail some of you already have it because i leaked it a bit early

Keep in mind this is being posted on totse with a vaild volume agreement i have legitimately purchased and i modified the key as to not give away who i am ..

I freely welcome redistribution it has never been released to the best of my knowledge anywhere before as i have searched and searched and searched ..

A few key point that i wish to say are

READ THE README.txt

This installer unpacks a diffrent installer then the readme.txt comes up actually fucking maximize this and read it

Simply read the readme.txt then close it the install will finish you will open rock sim you simply fill in the form with YOUR INFORMATION then click next and click read liscene file you then click the liscene we have packed with it (it will be on your desktop in a folder called Rocksim8)

Just wanted to give a big hand to my senior tech who was able to build the installer the way i asked him to and skin it nicely for me i really appreciate it .. Andrew does not get enough credit were it is needed

now for the link

this was hosted by a friend of mine who i will not identify as they are a member here as well if they wish to post they can

http://www.gettgp.com/content//.warweed//RockSim8.exe

A mirror:
http://irishpyro.com/RockSim8.exe

I need more people to host this please.. the more the better as once you play with you will agree it is a orgasmic program

Please post your Reveiws

You can set Environmental Controls
http://i16.tinypic.com/6g221k9.png

Create custom fin sets so you can do more then straight edge trapazoid style fins

http://i14.tinypic.com/4kvx4rl.png

you can do real time animated launch profiles showing ejection charges and if you set cross winds it will blow arounds and such

http://i18.tinypic.com/6bw236d.png

3D real time profiling

http://i11.tinypic.com/5xqijc3.png

Set simulation profiles such things as the engine you want

http://i14.tinypic.com/53sm0kg.png

detailed setup of parts

http://i19.tinypic.com/4qfs6bm.png

And Detailed simulation information

http://i14.tinypic.com/6bt235u.png

Temporally stuck thread thread

stupid noob · #2 2007-05-05, 07:04

You are such a fucking nerd. But, niiiiiiice. That's the shit.

FullMetalJacket · #3 2007-05-05, 07:10

Dizzamn, that's gonna be a handy file.

deathDiver · #4 2007-05-05, 07:17

well since i owe warweed a review for letting me have this early here it is:

This program kicks ass. You can build a custom rocket from a database of custom parts that is well in the dozens of choices for each part. Now, if you think it's a mix and match deal, just wait. Not only can you tweek the size of the body to a 1/10th of an inch, you can even make the nose cone the perfect size, and shape to your needs.

Now, once your rocket is built, you can launch it off, and see what it can do. This too is made to be used and abused! you can add wind, rain, any weather you can really think of. This will use the data to see how far you have to walk when it lands, how high it will go, and ect.

Now, warweed told me you can print a blueprint like sheet out to make sure you have a rocket, that is an exact copy of the one in a program.

overall, i give this my "omgwtf this owns" award.

warweed12 · #5 2007-05-05, 07:31

FYI not only can you build from a custom parts but you can pick from a LARGE number of material types for your Airframe your nose cone you fins everything you can add parachutes you can add engines you can hit print after you have built and designed it all and you can print off either parts lists from distributors you can click print and it will ask if you wish to print parts lists 3d designs you can select templates and print templats for the sizes of your nose cones and fine templates with nothcing if you choose to do through wall instead of suface mounts you can print out motor mount templates ect

Alek Tricity · #6 2007-05-05, 16:00

I like anything that has to do with what totse is really about.
Thanx

BOMBS OVER BEIRUT · #7 2007-05-05, 22:17

This program is amazing. There are simply too many features to cover in one post on totse, so I'll only mention some of my favorites.

Firstly, the ability to design schematics and 3D models of your rocket is greatly useful. All schematics can be scaled and printed as templates for machining. The 3D construction allows drag calculations to be simulated before a physical model is ever made.

Secondly, the ability to chose construction materials and engines allows you to calculate the total weight of the rocket, as well as that of individual segments.

Lastly, I'd like to bring attention to the simulation feature. It's simply mind blowing, try playing around with the weight of your rocket and see how it affects flight dynamics.

warweed12 · #8 2007-05-05, 23:00

Thanks for the reveiw once i have a few more of them i will package your reveiws into the installer itself

i will not make it open like the readme.txt but it will place it in the folder on desktop

no one commented on my Splash screen or the cool ASCII art we made

Random_Looney · #9 2007-05-06, 19:16

I'm definitely saving this for my CNC machine.

tordek battlehammer · #10 2007-05-07, 15:18

Sweet! just what I need, im working on some rocketry at the moment. If I can get the hang of this program it should be very useful!

delusional_reality · #11 2007-05-07, 18:14

for some reason, I can't save this at all..the save button is pale..hmm

tordek battlehammer · #12 2007-05-07, 20:46

Quote:

Originally Posted by delusional_reality View Post

for some reason, I can't save this at all..the save button is pale..hmm

Same for me, try:

"Right click", "Save link as"

smokeymcpot420 2 · #13 2007-05-07, 23:25

I also hosted a mirror of it for warweed, but its incredibly slow... http://www.smokeynet.org/RockSim8.exe

warweed12 · #14 2007-05-08, 03:56

http://i14.tinypic.com/6ew761k.png

just a little smokey

smokeymcpot420 2 · #15 2007-05-08, 04:08

I could get like 500kbps up but I have limiters and QOS on that server. Some people like to rob all my music and crash my network booting all my IRC clients! >

And1129 · #16 2007-05-08, 06:38

Very cool! I like it a lot, so thanks for sharing Warweed! I will get down to playing with it in T - 3 days as soon as my finals are over!

warweed12 · #17 2007-05-08, 07:08

it can get complex on doing a few things if you need any help just ask here i would be more then happy to show you how and take screen caps or video of doing such

Random_Looney · #18 2007-05-08, 18:08

Any way to convert rocksim CAD-type files to anything AutoCAD can read?

warweed12 · #19 2007-05-09, 05:19

to be honest im not sure i know rocksim allows you to export 3d models into certain file types but importing them to cad ... well i have not worked with cad enough to know there could be a way to convert the file types to support it possibly

psyco_1322 · #20 2007-05-11, 14:04

Thanks for the great program Warweed! I do appreciate it.

warweed12 · #21 2007-05-11, 20:17

no problem what so ever

glad to share

delusional_reality · #22 2007-05-14, 00:56

this program is so cool!
I would give you the holy grail of pyrotechnics right now (if I knew what it was)

behindthemask · #23 2007-05-14, 05:56

Aww man that took forever to download (because I have uber slow connection) but hopefully it's worth it. I already have a model rocketry kit though but I might want to build my own.

warweed12 · #24 2007-05-14, 06:00

oh it's worth it

if you think it's not it's because you have no clue how to use it :P look at some of the packaged already built ones

Toxicwboy · #25 2007-05-21, 00:44

Thanks a ton =)

magixx · #26 2007-05-23, 21:49

Mirrors:

http://rapidshare.com/files/33012376/RockSim8.exe
http://d01.megashares.com/?d01=551bfb2

I installed it and whenever i tried to add a component it said it could not read the materials.cvs, I the uninstalled it from program menu, went to your installer and tried to remove but it fugged up and said it could not do anything. I tried to click repair but it said a big fuck you error error blah blah blah, i deleted the folder in the program menu but its still the same.

warweed12 · #27 2007-05-23, 22:17

the uninstaller is a known issue and were working on it as for the materials.cvs i will try and replicate the error when i get home

Discordia · #28 2007-05-26, 07:21

I managed to get the Materials.CSV missing/not found error as well, I don't suppose you've come up with a fix yet, have you? Thanks for redisting this too, its going to help immensely with quite a few things.

warweed12 · #29 2007-05-26, 17:58

Yes a Fix is being made to correct this issue were not quite sure what is causing the problem ..

What OS are you running ? as well basic stats IE processor speed and Ram and HD space / remaining free

as well if you could check

C:\Program Files\RockSim 8\Data

and just tell me if you can find the Materials.CSV

if it is there let me know if not i will try and make a much better Installer when i have a chance ATM this one basically takes the Roc Sim installer and packages it with my infomation there is a problem with the remove script as we built some VB in there that pretty much loads the roc sim installer in a temp folder then once that installer has been installed the VB removes it causing some errors in the uninstaller i found you can correct this issue of uninstal but you have to run the roc sim uninstall then goto control panel and click our installer and click remove in add/remove programs...

When we purchase a legal version of install shield we shall make a *updater*

to allow for New things to be added

Discordia · #30 2007-05-26, 21:07

the Materials.CSV is AWOL

I'm running:
WinXPsp2
1.25Ghz AMD
704MB RAM
50/80GB HDD space remains.

warweed12 · #31 2007-05-31, 04:32

the maximum altitude is only in the visual simulation .. the flight data is accurate

i have simmed to 67 thousand before

Discordia · #32 2007-05-31, 04:47

I know the standard sims are accurate, I've been consistently hitting 53,000 feet, its just something different to watch the rocket reach apogee, recover, and float/plummet down to earth

Jizzmeister · #33 2007-06-13, 11:27

Thanks for the program

.

I'm sure I'll have fun doing some simms when I'm not recovered from last nights hangover

warweed12 · #34 2007-06-14, 05:07

materials file everyone wants lol

Code:

Material Name,Units,Density,Low,High,Class,Rocketry Use,Body Tubes,Fin Sets,Launch Lugs,Cords,Nose,Chute,Stream,Trans,Ring,Bulkhead,Engine Block,Sleeve,Tube Coupler,spare,spare,spare,spare,spare,spare,spare,spare,spare,spare,
"G10 (PML 0.062"")",oz/in2,0.0714,,,,1,0,1,0,0,0,0,0,0,1,1,1,0,0,,,,,,,,None,0,?
.060 carbon fiber,kg/m3,1400.,,,,1,0,0,0,0,0,0,0,0,0,1,0,0,0,,,,,,,,None,0,0
1 In. flat elastic,oz/in,0.0139,,,,1,0,0,0,1,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,?
1.3 oz. Ripstop Nylon (SkyAngle),oz/in2,0.001003,,,,1,0,0,0,0,0,1,1,0,0,0,0,0,0,,,,,,,,None,0,0
1.9 oz. Ripstop Nylon (SkyAngle),oz/in2,0.001466,,,,1,0,0,0,0,0,1,1,0,0,0,0,0,0,,,,,,,,None,0,0
1/16 Aircraft Plywood,kg/m3,361.37652530000003,,,,1,0,1,0,0,0,0,0,1,1,1,0,0,0,,,,,,,,None,0,0
1/16 In. braided nylon,g/cm,0.0102,,,,1,0,0,0,1,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,?
1/16 In. round elastic,g/cm,0.0183,,,,1,0,0,0,1,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,?
1/2 In. flat elastic,oz/in,0.0028,,,,1,0,0,0,1,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,?
1/32 In. kevlar,g/cm,0.00659,,,,1,0,0,0,1,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,?
1/4 Aircraft Plywood,kg/m3,344.26880679999999,,,,1,0,1,0,0,0,0,0,0,1,1,0,0,0,,,,,,,,None,0,0
1/4 In. flat elastic,g/cm,0.0402,,,,1,0,0,0,1,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,?
1/8 Aircraft Plywood,kg/m3,337.54105229999999,,,,1,0,1,0,0,0,0,0,0,1,1,0,0,0,,,,,,,,None,0,0
1/8 In. flat elastic,g/cm,0.0205,,,,1,0,0,0,1,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,?
1/8 In. flat rubber,g/cm,0.0231,,,,1,0,0,0,1,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,?
100lb Kevlar (Apogee 29505),g/cm,0.0039698,,,,1,0,0,0,1,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,0
1500lb Kevlar (Apogee 29507),g/cm,0.059875,,,,1,0,0,0,1,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,0
260 lb. elastic,kg/m3,0.,,,,1,0,0,0,1,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,0
3/16 Aircraft Plywood,kg/m3,344.26880679999999,,,,1,0,1,0,0,0,0,0,0,1,1,0,0,0,,,,,,,,None,0,0
3/4 In. flat elastic,oz/in,0.011,,,,1,0,0,0,1,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,?
3/8 inch Flat Elastic,g/cm,0.038,,,,1,0,0,0,1,0,0,1,0,0,0,0,0,0,,,,,,,,None,0,0
3/8" tubular nylon (SkyAngle),oz/in,0.166667,,,,1,0,0,0,1,0,0,1,0,0,0,0,0,0,,,,,,,,None,0,0
30 Lb. kevlar,g/cm,0.00178,,,,1,0,0,0,1,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,?
300lb Kevlar (Apogee 29506),g/cm,0.01128609,,,,1,0,0,0,1,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,0
4000 lb. nylon,kg/m3,0.,,,,0,0,0,0,0,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,0
5/64 In. round elastic,g/cm,0.0242,,,,1,0,0,0,1,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,?
5/8" Tubular nylon (SkyAngle),oz/in,0.2,,,,1,0,0,0,1,0,0,1,0,0,0,0,0,0,,,,,,,,None,0,0
6000 lb. nylon,kg/m3,0.,,,,0,0,0,0,0,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,0
6oz & 2oz FG & poster board,kg/m3,798.85,,,,1,0,1,0,0,0,0,0,1,1,0,0,0,0,,,,,,,,None,0,0
70 Lb. kevlar,g/cm,0.0033,,,,1,0,0,0,1,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,?
9/16 In. tubular nylon,oz/in,0.015,,,,1,0,0,0,1,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,?
Acrylic (Cast),lb/ft3,74,,,,1,0,1,0,0,1,0,0,1,0,1,0,0,0,,,,,,,,None,0,?
Aircraft plywood (Birch),lb/ft3,45.26,,,,1,0,1,0,0,0,0,0,0,1,1,1,0,0,,,,,,,,None,0,0
Aircraft plywood (LOC),lb/ft3,45.26,,,,1,0,1,0,0,0,0,0,0,1,1,1,0,0,,,,,,,,None,0,0
Ash,lb/ft3,42.5,,,,1,0,1,0,0,1,0,0,1,1,1,0,0,0,,,,,,,,None,0,0
Balsa,lb/ft3,8,,,,1,1,1,0,0,1,0,0,1,1,1,1,0,0,,,,,,,,None,0,?
Basswood,lb/ft3,26.5,,,,1,0,1,0,0,1,0,0,1,1,1,1,0,0,,,,,,,,None,0,?
Beech,lb/ft3,45,,,,0,0,1,0,0,1,0,1,1,1,1,1,0,0,,,,,,,,None,0,?
Birch,lb/ft3,42.5,,,,1,0,1,0,0,1,0,1,1,1,1,1,0,0,,,,,,,,None,0,?
Brass,lb/ft3,534,,,,1,0,0,1,0,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,?
Carbon Fiber,kg/m3,1400.,,,,1,1,1,0,0,0,1,0,0,1,1,1,1,1,,,,,,,,None,0,0
Cardboard,lb/ft3,43,,,,1,1,1,1,0,1,0,0,1,1,1,1,1,1,,,,,,,,None,0,?
Carpet String (Apogee 29500),g/cm,0.0032972,,,,1,0,0,0,1,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,0
Cellulose Acetate Propionate,lb/ft3,74.9,,,,1,1,1,0,0,0,0,0,0,1,1,1,1,1,,,,,,,,None,0,?
Chalk (Fine),lb/ft3,70,,,,0,0,0,0,0,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,?
Copper (cast),lb/ft3,542,,,,0,0,0,0,0,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,0
Copper (rolled),lb/ft3,556.,,,,0,0,0,0,0,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,0
Cork (Solid),lb/ft3,15,,,,1,0,0,0,0,1,0,0,0,0,1,0,0,0,,,,,,,,None,0,?
Cottonwood,lb/ft3,25,,,,0,0,0,0,0,0,0,1,0,0,0,0,0,0,,,,,,,,None,0,?
Epoxy,lb/ft3,78.3,,,,0,0,0,0,0,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,?
Fiber,lb/ft3,41,,,,1,0,0,0,0,0,0,0,0,1,1,0,0,0,,,,,,,,None,0,0
Fiberglass,kg/m3,128.147704,,,,1,1,1,0,0,1,0,0,1,1,1,1,1,1,,,,,,,,None,0,0
Fir (Douglas),lb/ft3,35,,,,1,0,1,0,0,1,0,0,1,1,1,1,0,0,,,,,,,,None,0,?
Fir (White),lb/ft3,25,,,,1,0,1,0,0,1,0,0,1,1,1,1,0,0,,,,,,,,None,0,?
G10 (PML 0.093),oz/in2,0.1143,,,,1,0,1,0,0,0,0,0,0,1,1,1,0,0,,,,,,,,None,0,?
G10 (PML 0.125),oz/in2,0.1404,,,,1,0,1,0,0,0,0,0,0,1,1,1,0,0,,,,,,,,None,0,?
G10 fiberglass,lb/ft3,118.94,,,,1,1,1,0,0,1,0,0,0,1,1,1,1,1,,,,,,,,None,0,?
G10 fiberglass (LOC),lb/ft3,118.94,,,,1,0,1,0,0,0,0,0,0,1,1,1,0,0,,,,,,,,None,0,?
G10 phenolic,lb/ft3,118.94,,,,1,0,1,0,0,0,0,0,0,1,1,1,0,0,,,,,,,,None,0,?
Gold (24 kt.),lb/ft3,1204.,,,,0,0,0,0,0,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,0
Kevlar Thread (Apogee 29502),g/cm,0.0008858,,,,1,0,0,0,1,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,0
Kraft phenolic,lb/ft3,59.85,,,,1,1,0,0,0,0,0,0,0,1,0,0,1,1,,,,,,,,None,0,?
Lead (cast),lb/ft3,708.,,,,0,0,0,0,0,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,0
Lead (rolled),lb/ft3,711,,,,0,0,0,0,0,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,?
Leather,lb/ft3,59,,,,0,0,0,0,0,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,?
Lexan,g/cm3,1.218,,,,1,0,1,0,0,0,0,0,0,1,1,1,0,0,,,,,,,,None,0,?
Maple (Hard),lb/ft3,39.5,,,,1,0,1,0,0,1,0,0,1,1,1,1,0,0,,,,,,,,None,0,0
Mylar,g/cm3,1.309,,,,1,0,0,0,0,0,1,1,0,0,0,0,0,0,,,,,,,,None,0,?
Nylon,g/cm3,1.14,,,,0,0,0,0,0,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,?
Oak (Brown),lb/ft3,45,,,,0,0,0,0,0,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,?
Oak (Red),lb/ft3,45,,,,0,0,0,0,0,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,?
Oak (White),lb/ft3,47,,,,0,0,0,0,0,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,?
PVC,lb/ft3,81.2,,,,1,1,1,0,0,0,0,0,0,0,0,0,0,1,,,,,,,,None,0,?
Paper,lb/ft3,70,,,,1,1,1,1,0,1,0,1,1,1,1,1,1,1,,,,,,,,None,0,0
Pine (White Northern),lb/ft3,25,,,,1,0,1,0,0,1,0,0,1,1,1,1,0,1,,,,,,,,None,0,?
Pine (White Western),lb/ft3,27,,,,1,0,1,0,0,1,0,0,1,1,1,1,0,1,,,,,,,,None,0,?
Polycarbonate,lb/ft3,74.9,,,,1,1,1,1,0,1,0,0,1,1,1,1,1,1,,,,,,,,None,0,?
Polyethylene LDPE,lb/ft3,57.7,,,,1,0,0,0,0,0,1,1,0,0,0,0,0,0,,,,,,,,None,0,?
Polystyrene PS,lb/ft3,65.5,,,,1,1,1,1,0,1,0,0,1,1,1,1,1,1,,,,,,,,None,0,?
Poplar (Yellow),lb/ft3,30,,,,0,0,0,0,0,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,?
Quantum Tubing,g/cm3,1.1,,,,1,1,0,0,0,0,0,0,0,0,1,0,1,1,,,,,,,,None,0,0
Rip stop nylon,g/cm2,0.006685,,,,1,0,0,0,0,0,1,1,0,0,0,0,0,0,,,,,,,,None,0,0
Rocketwood,lb/ft3,33.030000000000001,,,,1,1,1,0,0,0,0,0,0,1,1,1,1,1,,,,,,,,None,0,0
Silver,lb/ft3,653,,,,0,0,0,0,0,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,?
Spiral/Glassine,lb/ft3,53,,,,1,1,1,1,0,1,0,0,1,1,1,1,1,1,,,,,,,,None,0,?
Spruce,lb/ft3,28,,,,1,0,1,0,0,1,0,0,1,1,1,1,0,0,,,,,,,,None,0,?
Steel,kg/m3,0.,,,,0,0,0,0,0,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,0
Sycamore,lb/ft3,35,,,,0,0,0,0,0,0,0,0,0,0,0,0,0,0,,,,,,,,None,0,?
Urethane,lb/ft3,52.880000000000003,,,,1,0,0,0,0,1,0,0,1,0,0,1,0,0,,,,,,,,None,0,0
lite ply,lb/ft3,22,,,,1,0,1,0,0,0,0,0,0,1,1,1,0,0,,,,,,,,None,0,0
,kg/m3,0.,0.,0.,unknown,1,0,0,0,1,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0
1 in. tubular nylon,oz/in,0.04,0.04,0.04,unknown,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,0,0,0
1/2 in. tubular kevlar,oz/in,0.04,0.04,0.04,unknown,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,0,0,0
1/4 in. tubular kevlar,oz/in,0.02,0.02,0.02,unknown,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,0,0,0
BadNoseMaterial,kg/m3,128.147704,128.147704,128.147704,unknown,1,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
FUBAR,kg/m3,1049.2093264999999,1049.2093264999999,1049.2093264999999,unknown,1,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
Iron (cast,lb/ft3,450,450,450,Metal,n,n,n,n,n,n,n,n,n,n,n,n,n,n,n,n,n,n,n,n,n,n,n,n
Iron (wrought),lb/ft3,485,485,485,Metal,n,n,n,n,n,n,n,n,n,n,n,n,n,n,n,n,n,n,n,n,n,n,n,n
A-JUNK-1,kg/m3,23.,23.,23.,unknown,1,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
paper2,kg/m3,752.54739170000005,752.54739170000005,752.54739170000005,unknown,1,0,0,0,0,0,0,0,0,1,0,1,0,0,0,0,0,0,0,0,0,0,0,0

xPSPx324 · #35 2007-06-16, 20:52

nice.

Profjackal · #36 2007-06-18, 19:16

all well and good this orgasmic rocket sim program, but it still didn't tell me that the rocket would end up embedded in my best friends neighbours window.

warweed12 · #37 2007-06-19, 05:43

it does have a wind speed and enviroment control factor plus i tend to think the fault lies in the creator as i have simed rockets to close to 15 feet alt. wise and 30 in touch down

BlancMange · #38 2007-06-21, 16:17

Quote:

Originally Posted by warweed12 View Post

I have finally bought and packaged Rocksim 8.01 which is the rocket simulation software i used in the horizontal rocket project you honestly can do EVERYTHING with this .. if you can not figure out how to sime a rocket of your choice let me know i will show you how i have built and simed all my rockets here they will tell you how to improve it and show you 3D models of it as you build it you can cluster build custom parts you can do anythign really I have included alot of RCK files with it these are designs of common rockets out there in kits ..

To be honest im not going to show pics or describe it's awesomeness in detail some of you already have it because i leaked it a bit early

Keep in mind this is being posted on totse with a vaild volume agreement i have legitimately purchased and i modified the key as to not give away who i am ..

I freely welcome redistribution it has never been released to the best of my knowledge anywhere before as i have searched and searched and searched ..

A few key point that i wish to say are

READ THE README.txt

This installer unpacks a diffrent installer then the readme.txt comes up actually fucking maximize this and read it

Simply read the readme.txt then close it the install will finish you will open rock sim you simply fill in the form with YOUR INFORMATION then click next and click read liscene file you then click the liscene we have packed with it (it will be on your desktop in a folder called Rocksim8)

Just wanted to give a big hand to my senior tech who was able to build the installer the way i asked him to and skin it nicely for me i really appreciate it .. Andrew does not get enough credit were it is needed

now for the link

this was hosted by a friend of mine who i will not identify as they are a member here as well if they wish to post they can

http://www.gettgp.com/content//.warweed//RockSim8.exe

A mirror:
http://irishpyro.com/RockSim8.exe

I need more people to host this please.. the more the better as once you play with you will agree it is a orgasmic program

Please post your Reveiws

You can set Environmental Controls
http://i16.tinypic.com/6g221k9.png

Create custom fin sets so you can do more then straight edge trapazoid style fins

http://i14.tinypic.com/4kvx4rl.png

you can do real time animated launch profiles showing ejection charges and if you set cross winds it will blow arounds and such

http://i18.tinypic.com/6bw236d.png

3D real time profiling

http://i11.tinypic.com/5xqijc3.png

Set simulation profiles such things as the engine you want

http://i14.tinypic.com/53sm0kg.png

detailed setup of parts

http://i19.tinypic.com/4qfs6bm.png

And Detailed simulation information

http://i14.tinypic.com/6bt235u.png

Temporally stuck thread thread

I fucking love you.

warweed12 · #39 2007-06-21, 19:09

i love me to but hearing it from others is always nice