is there a way to take most if not all the stuff coke was cut with? or anything to better it. thanks

Send it to me and i'll purify it for you-course you probably won't get it back!

cookin it to crack is the only way i know of.

hmm, turning it into crack...

how does that work by removing the impurities? does it just burn off all the crap?

anyone else have any idea's?

thanks

Actually, I believe turning it into crack would add impurities.

It probably can be converted to FB, however, and then back to the HCl salt, which would in theory shed it of impurities during the process.

Check Rhodium. Or the search engine for that matter!

Lukky D

I dont think theres a good easy way to remove cut from powder and still have powder, if u dont mind drinking,shoting,smoking it u can add water to a small amount in a spoon and all cut will be on bottom as coke is water solutible, and most cut is not. to make base or crack add half the amount of coke , around 50 to 1 or a bit less of bakeing powder to the coke, add 5 to 10 times the volume in water, heat gently to hot in double boiler,use a large nail or anything that is round and small enough to put in jar and mix, chill the nail in freezer, when ur mix is hot stick cold ass nail in and slow swirl it, the raw coke will stick to nail. take it out and scrap rock off nail, let dry and u have crack, swim allways did this 2 -3 times till nothing sticks, on last try add some ice or cold water to make raw coke harden up if theres any left in the mix, chuck the water and smoke the scraping with gentle heat to just cause smoke, be sure to hold hit for best effect as it is quite different than snortin a line, more of a rushy feelings then the long term coke buzz.



swim has a times just added water to a 1/4 gram , let cut settle and drink it, faster hittin but same buzz as snortin without the rush feeling.

enjoy. RNX57%

CORRECTION, use bakeing SODA not powder



sorry was off for lunch n realized the misinformation i gave.... what a lamer a, lol

RNX57%

So if coke is water soluble and most cut isn't, couldn't you just mix it in water, strain through coffee filter then let the water evaporate to get pure powder??

bump to that!

i thought about the coffee filter, but a coffee filter might not be the best filter to use.

coke is often cut with dextrose, asprin, etc atleast around here i think

First off, Cocaine, when heated, is an oil. Trying to filter it will just get it stuck in the filter - no return. AND NOT heating it will do nothing. You have got to get the oil to float away from the impurities.

The best way to do it is not to make crack, because crack is whack. However, you can base it out with a little ammonia, emphasis on LITTLE, and a small flask (be sure to wash the final product in a tea bag with water for about 1/2 hour) OR you can simply add some baking soda (about half the amount of Coke) heat over a heating source, SWIRL, and then cool with some ice water while slowly pouring out the hot water. If you do it right a nice rock should form while you swirl, if you do it half right the coke will stick to the sides of the glass and you will have to scrape it off, if you do it wrong you will get nothing or it wasn't coke to begin with. Remember, coke placed in water and heated will float as an oil. I would imagine that simply reducing all the water off will result is somewhat of a cleaner product.

WannaBe

If the coke was cut with mannite or some other sugar, the coke could be disoved in H2O. Then alkali, usualy NH3OH, is added. The cocaine then precipitates out of solution as the hydroxile-base. These flakes can then be cleaned with more H2O.

After it dries one would have so called "free base cocaine". That form is smokable, but you could disolve it in a solution of HCL and recrystalize cocaine HCL from that.

However, if the coke was cut with benzocaine or novacaine, the above method would not work. The benzocaine or novacaine would precipitate along with the cocaine.

[This message has been edited by DrY.R.Head (edited 09-18-2003).]