About
Community
Bad Ideas
Drugs
Ego
Erotica
Fringe
Society
Technology
register | bbs | search | rss | faq | about
meet up | add to del.icio.us | digg it
Go Back   Community > Science > Laboratory Tips
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Laboratory Tips Safety proceedures, test reagents, drilling rubber stoppers, bending glass tubes, etc. Contributed to by chemists.

Reply
 
Thread Tools Display Modes
 #1 
Old 2003-08-14, 23:10
insaneike_420 insaneike_420 is offline
Regular
 
Default Low class Meth.....

I was wondering if this would make any kind of meth? I mean will it still give u sum effects of methamphetamine?

---------------------------------------------------

Ingredients

5 Benzedrex inhalers[$5 apiece]

Muratic acid

Materials

glass cassarole dish, or pyrex dish

coffe cup

spoon

Proceedure

1. Break open the inhalers to get to the filter inside.

2. Once you got them all out, put them into a coffee cup and pour in approx. 3 tablespoons of Muratic acid, and stir and mash them up REAL good.

3. Then you want to put a 3 to 1 mix of water to acid into the cup and stir it up some more.

4. Then you take half the liquid and put it into a glass casserole dish and hold it up over the lowest flame sitting on your stove and let it run around on ther until you see a white film develop.

-Pour the rest of the liquid on there and do it again.

5. Then take a spoon and put your thumb into the food side and run it all around inside the pan. -It will kinda get whiter if you know what I mean.

6. Then scrape it out with a razor blade.
 #2 
Old 2003-08-14, 23:21
gottagogo gottagogo is offline
Regular
 
Default Re: Low class Meth.....

NO! It isn't, doesn't, and won't.
 #3 
Old 2003-08-14, 23:45
Wicked_Rain Wicked_Rain is offline
Regular
 
Default Re: Low class Meth.....

SWIM has a roaddog doin 40 years for bustin a cap on a motherfucker selling that same shit. so id have to say no it isnt meth nor does it have the same effects or one fucker would still be alive and another would still be free. i guess it failed the ultimate test lol
 #4 
Old 2003-08-15, 19:09
cloud26 cloud26 is offline
Regular
 
Default Re: Low class Meth.....

I have done this many of times it does work if the inhalers have desoxyephedrine in them it is rather low quality but it works in a jam trust me I HAVE DONE IT IT WORKS evaporate it real slow especially towards the end try it out
 #5 
Old 2003-08-16, 08:06
suttleila suttleila is offline
Regular
 
Default Re: Low class Meth.....

dude it makes bullshit crank it does work tho.....why make crank with meth isn't much harder jus read up man i think you should try the rp/i method =) easier to obtain that anhydrous ammounia or than makin it
 #6 
Old 2003-08-16, 10:13
ThisLifeILead ThisLifeILead is offline
Regular
 
Default Re: Low class Meth.....

using the red phosphorous method is going to yeild results of up to 90-95% pure meth through pseudo/ephedrine(sudafed)inhalers dont contain ephetimine any more!! buy this is use almost the same method
 #7 
Old 2003-08-21, 00:34
abstraktx abstraktx is offline
Regular
 
Default Re: Low class Meth.....

hey for this method i also want to try....i have vick inhalers with levometefetamine in them will i use the same amopunt of inhalers and muriatic for this its 50 mgs of levo......
 #8 
Old 2003-08-21, 19:32
Orange Orange is offline
Regular
 
Default Re: Low class Meth.....

try this... This is how my friends used to do it before they got a deep breath of anny and crashed into a tree.

Take 20 boxes of sudafed-24hr.

1 4pack of energizer AA lithium batts.

1 koolaid pitcher half full of juice

(don't get juice yourself, pay a dope fiend a gram, this makes the best dope in SW Iowa.)

peel batts, crumple strips in your hand and toss them into the juice. stir till strips are completely dissolved. (if you get some of the aluminum in it from the batts, you can start a fire)

(group secret)to avoid burning up your batts, cut the positive end off CAREFULLY with a dremel tool before peeling.

take your pills (little bastards are like gravel, crush powder fine) and sift them slowly into the mix.

(group secret)to mix, carve a mixing spoon (wood or noncoated plastic) to fit a cordless drill. A common rookie mistake is not mixing thouroughly enough. Start the drill out slowly and as it dries speed up.

When it is completely dry put about 3x ammount of colemans on the mud.

(group secret)if you let it sit for about a week with the colemans on it the dope will be 2x as good.

Take 2 glass coffee pots COMPLETELY SPOTLESS. Use coffee filters to filter back and forth between coffee pots. Use 7, then6, then5, then4, then3 filters.

TIP1: Do not use more than 4 batts, it will dirty your dope. They call shit with too much lithium in it wierdo dope. Lithium is addictive and really fucks with your head about day 3.

TIP2: When bubbling, sulfiric acid causes less heat than muriatic acid, resulting in less dope lost to heat and a bigger yield. But everyone does it differently.

TIP3: #9 filters work the best.

TIP4: Ether blows, use colemans

TIP5: The lower the humidity the better

WARNING: If you get good at making dope this way you will not be able to stop, but don't take my word for it.

____________

I |

O nly |

W ant |

A nhydrous |

------------

[This message has been edited by Orange (edited 08-21-2003).]
 #9 
Old 2003-08-23, 01:52
Heil_Christ Heil_Christ is offline
Regular
 
Default Re: Low class Meth.....

in reference to orange's method, am i missing something here? you just filter the dope strait out of the liquid on top of the mud? you dont have to gas the fuck out of it first? or am i to assume that that's general knowledge
 #10 
Old 2003-08-23, 02:31
kirby kirby is offline
Regular
 
Default Re: Low class Meth.....

there are many better birch methods than oranges,,,study more
 #11 
Old 2003-08-23, 03:08
Heil_Christ Heil_Christ is offline
Regular
 
Default Re: Low class Meth.....

quote:Originally posted by kirby:

there are many better birch methods than oranges,,,study more



yeah man i realize that, im just reading everything i see on the topic in order to absorb as much as possible and the way im reading it there seems to be a missing step, what im asking is, would this feasibly work without the gassing phase?
 #12 
Old 2003-08-23, 03:45
gottagogo gottagogo is offline
Regular
 
Default Re: Low class Meth.....

Apparently orange got his name from his dad who breathed a lot of agent orange which caused his offspring to be severely brain damaged.

At first, I thought he was joking around with that method. I would hope that anyone who reads that shit will not even bother to try to understand it. The next time any ot you have to buy, make sure you ask the guy if he is from Iowa first.

ike--

The method you describe is a variation of a very old bullshit recipe that won't seem to go away. I can't remember exactly what the names are, but there are two forms of meth. One is called d-meth (I think) and the other is called l-meth. The one that you get from the recipe you have is the one that is not active in humans. This means it won't get you high.

Unless you aren't a human, maybe.

"Crumble up the strips in your hand." That's funny. Sometimes you guys really crack me up.
 #13 
Old 2003-08-25, 08:26
Orange Orange is offline
Regular
 
Default Re: Low class Meth.....

If you think this doesn't get you high you are way wrong. Sorry, I left out the last step assuming people at least knew how to bubble.

cut a hole in the cap of a 2liter.

take a 3ft aquarium hose and run an inch through the cap(hole should be airtight).

pour 1/2 can uniodized salt into 2liter.

pour 3 capfuls of rooto professional strength drano onto the salt.

screw the cap on and place the other end of the hose just barely below the surface of the colemans, blowing the smoke off as it gathers.

your dope should begin to snow down to the bottom of the coffeepot.

The recipe makes 1/2oz-3/4oz of some killer shit provided all your tools were clean.

oh yeah, you can continue to resoak the mud until it turns dark yellow.

Im not a chemistry whiz or college graduate but I know this method works, I have seen\smoked its results on several occations.

OK ALL YOU ARROGANT PRICKS HAPPY NOW???
 #14 
Old 2003-08-25, 08:59
kirby kirby is offline
Regular
 
Default Re: Low class Meth.....

ok heil--didnt see your question before or id have answered it more promptly---when you say gassing im presuming you mean at the end to solidify the meth out of the ammonia/sodium solvent---after the reduction and the ammonia has evapped off then your left with liquid meth in whatever solvent you used---you gas this to make it a solid---there are other ways to get the oil to form a solid but most of them are covered in the redphos/iodine methods and im not current on there exact formula --but to answer you--yes you must gas it-------------if you mean do you have to gas it with anhydrous ammonia no you dont---theres a couple of other ways to disolve the sodium/lithium to get the required solvated electrons but most of them im not familiar with--i am familiar with methylamine, ethylamine, ethylenediamine,ethoxyethylamine, most polyamines,HMPA,,,theres quite a few others but im buggered if i can remember them
 #15 
Old 2003-08-25, 09:21
Orange Orange is offline
Regular
 
Default Re: Low class Meth.....

quote:Originally posted by kirby:

there are many better birch methods than oranges,,,study more

If you can find the time would you mind enlightening me? Always room for improvement.
 
To the best of our knowledge, the text on this page may be freely reproduced and distributed.
 

totse.com certificate signatures
 
 
About | Community | Bad Ideas | Drugs | Ego | Erotica | Fringe | Society | Technology
Hot Topics