being that your the one to talk to about the annie method can u school me a little on this method ive been doing some research but need to learn as much as posible on this method in detail if u would please your info is very very much apreciated brother...

ask away bro i see what i can do

quote:Originally posted by pikk:

ask away bro i see what i can do

I would like to know some stuff, too. I have been trying forever to get some annie, but noone around here seems to have any or know where to get any.

I have a few syntheses, but very few of them look like they would work.

Dreams I have had haven't yielded anything promising...

quote:Originally posted by pikk:

ask away bro i see what i can do

o.k bro..heres what my dreams so far has come up with need for u to correct anything im wrong about ingredients ill need

sudafed 24h.

eather

denatured alcohol

muriatic acid

table salt

lithium strips

to clean pills you put pills in jar with about 1/2 cup of denatured alcohol and swish around next you filter then you grind them in a food processer next you put in a clean jar with double the amount of denatued alcohol as pill mass and let it sit for about two hours..then you filter it off again you keep doing this till it comes out clear once its clear you put in microwave in safe casaroll dish and evaporate till it starts to fluff up then take out..take your eather and put in a jar and add your lithium strips to the eather and set aside...you take a cooler and pour your hyndrous its 700ml.to every 30g of psuedo.and 1 lith.strip to every 7g. of pseudo. so you add your lith.strips one at a time till they are all melted next you start addind your pseudo..once you start mixing u cant stop till it turns blue or purple color and gets chalky...also mix with a wooden spoon metal will set it off..and of course have good ventilation..you add the "mud" or chalky stuff to your eather and it will start to boil you let it sit till it stops boiling after that you filter off the liquid into a seperate clean jar to recrystalize you use the muriatic,salt,foil method...

as you can see i do need your help want to get as much info.on this before y try this dream of mine if u can point out the do"s and dont"s but in simple terms dont understand all them educated terms if u know what i mean bro...as you can see im looking in to you cause i read in another thread that you can be trusted and not going to do me wrong or not going to put out wrong info...thank u bro..



[This message has been edited by crashnburn (edited 06-19-2003).]

ok first you need to get these things

sudo (30grams)

4 li strips

700 ml of annie

and a np swim likes xyline but you can use either if you like shits to flamable for me

and thats about it for the birch

ok add your li to your annie it will turn blue stir this till the li desolves now sprinkle your your sudo into this .stir while you are doing this. keep stirin till it quits going blue and stays gray. when it stays gray add you np(about 3 qt's). let your mass and your np sit for about a hour. then pull off your np put into qt jars you will be gasing these. qt jars seem to be about the right size for this size rxn.

now on to gasing for this you need 3 things



sulfric acid

salt

a beer bottle with a attachable hose

ok put one inch of acid in the bottem of the beer bottle( dont get it on you)now add salt till it starts to smoke. attach the hose and shake it a little it will really start to smoke now take the end the smoke stick it into the qt jar with the np/meth in it give it a secondand it will start to snow in the jar when it starts to slow down filter it out put that jar to the side and grab another jar and do the same.wash the dope in the filter with cold dry actone. let dry or re-xtal enjoy

tin foil and hcl and salt sucks dont do this it does not work that well so it is a waste of your time. you will have better luck with the sulfric and salt

[This message has been edited by pikk (edited 06-20-2003).]

I Gotta admit I don't know shit (that rhymes) about birch, BUT to make hcl gas most efficiently, sulfuric acid with muriatic acid dripped onto it will produce some very dry gas. Just don't let the hcl pool or sit on the sulfuric. This can cause it to react violently when shaken or mixed, even a little. Keep it stirred or swirled or whatever.

Hey pikk, don't you have to use some pretty high quality sulfuric acid (lab grade stuff or better) to make this work? Does sulfuric acid and sodium chloride make hcl?

I hope this doesn't make me sound too stupid. Swigotta doesn't use these methods, so I don't get to read too much about them.

I really should take my own advice and research, but I'm not too interested, just curious.

o.k. thank u brothers for ur very much appreciated info..dont know what id do without you fellas...if theres anything i can do for u guys let me know...lots of materials down here .....down south that is ...thank u again "pikk""gattagogo"much love... N STAY "SUCKER FREE"......crashnburn waves to yall from down south of the border....peace...

hay gogo you just need 93% drain cleaner like (LF) and salt it works great

Crashnburn, you will need either the red (30mg) or the white (60mg) instead of the 24hour ones. The time released ones require alot more cleaning than what you are doing. Whatever you do, make sure you have enough nh3 to keep lithium good and saturated cause if not it will catch on fire. It is much better to have too much than not enough. I agree with Pikk on using the muratic and tin foil and Gotta's way takes a little more effort to set up. PLEASE BE CAREFUL! THIS CAN BE EXTREMELY DANGEROUS!