I originally posted this in the chemistry forum, but they said I would have better luck here.

I need something cold enough that will melt lithium. And I don't have any farms around my area I also don't have any access to R-12 freon.

I heard about blue ammonia and found this site on how to make it: "members.lycos.nl/pyrocorp/pyrocorp_online/drugs.htm" but the dimensions aren't given very specifically. Any information on this would be greatly appreciated.

Blue ammonia is made by adding a blue dye to ammonia soloution.

quote:Originally posted by Starcraft:

Blue ammonia is made by adding a blue dye to ammonia soloution.

I wasn't asking for a smartass comment, queer!

I will also like to have of them more information !

because he use Nitrate ammonuim !

quote:Originally posted by da_guy:

I wasn't asking for a smartass comment, queer!

LMAO.....

What a stupid ass question, how do you made blue ammonia,

go to the store and buy it,lol. Its Windex window cleaner.

Starcraft !! here the formula to manufacture ammonia blue!

with this formule we can reduction ephedrine or no reduction ?

-------------Formula--------------------

Blue ammonia can de made by mixing 2 parts ammonia nitrate (fertilizer), 1 part red devil lye (NaOH) and a little of pure salt (NaCl). take 2 dry tanks (5gl propane tanks) 1st tank is mixing tank. Put a 3/4 x 4 nipple on to top of mixing tank then 3/4 valve- 1" nipple- 1 3/4 tee- then screw 18" piece of pipe onto tee sticking straight up with screw on cap. Off of tee short nipple and 3/4 valve, pipe over from this valve to second tank.

take all dry mixtures from above and put into tank 1. Make sure both valves are OFF. Take cap off of 18" pipe, fill pipe with industrial strength ammonia. While tank 2 is totally submerged in ice open valve 1 and let liquid ammonia drop. let react for 15- 20 minutes. open valve 1 then 2, you will hear vapors go from tank 1 to tank 2. Do this step several times until it stops reacting. You should have pure blue ammonia

that will melt lithium strips when added. This ammonia will eat up the brass valves so try to use stainless steel valves if possible. You will need to replace the brass ones when you hear, or see it leaking. You will smell the vapors leaking from the valves when they need to be replaced. Does not yield a lot of liquid ammonia, but it does work if done right.

da_guy man lol to make annie the cheapest and easiest way look at lordmightys makin annie recipe then read my reply peace out =)