About
Community
Bad Ideas
Drugs
Ego
Erotica
Fringe
Society
Technology
register | bbs | search | rss | faq | about
meet up | add to del.icio.us | digg it
Go Back   Community > Science > Laboratory Tips
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Laboratory Tips Safety proceedures, test reagents, drilling rubber stoppers, bending glass tubes, etc. Contributed to by chemists.

Reply
 
Thread Tools Display Modes
 #1 
Old 2003-06-10, 20:18
drownsoda drownsoda is offline
Regular
 
Default lighter fluid in nano

just wondering where i can find this 'charcoal lighter fluid' or what else can be used.

help appreciated.
 #2 
Old 2003-06-10, 22:43
acidmelt acidmelt is offline
Regular
 
Default Re: lighter fluid in nano

use vm&p naptha, you can find it at any department store with the paint thinner
 #3 
Old 2003-06-10, 22:52
gottagogo gottagogo is offline
Regular
 
Default Re: lighter fluid in nano

Well, I've heard of people using lighter fluid like the kind you put in your zippo. This stuff contains naptha which is used as a nonpolar solvent. A better choice would be VM&P Naptha from the hardware store. The VM&P stands for varnish makers and painters. There's nothing special about it, it's still just naptha although it could be a better grade. There are also other good nonpolar solvents at the hardware store. Toluene and xylene come to mind. Getting them at the hardware store (small ones) is cheaper and more reliable.

Well looky there. While I was writing this, homeboy put it up the right way--short and to the point. Why can't I do that?

[This message has been edited by gottagogo (edited 06-10-2003).]
 #4 
Old 2003-06-10, 23:46
lukkydleprachan lukkydleprachan is offline
Regular
 
Default Re: lighter fluid in nano

SWIL would like to point out that Naptha has a rather pleasant smell compared to that of xylene. Light and Sweet.

SWIL would STRONGLY suggest to stay away from boiling Naptha though. It's fumes are heavier than air, and even electric heating coils can ignite them. BEE-Ware!

For an A/B, some like to heat Naptha first before using. It will increase "pulling power". SWIL, although he agrees with the logic, doesn't agree with the method. He would rather use it cold, and have to do an extra pull, rather than risk a fire by heating it and furthermore pulling GAKK infested product.

Cold naptha and careful basing, seems to also be a way around the OrangeGakk attack!

Lukky D
 #5 
Old 2003-06-11, 01:43
pikk pikk is offline
Regular
 
Default Re: lighter fluid in nano

swild knows this first hand dont he.

curb was talking about kingsford charcol fluid
 #6 
Old 2003-06-11, 02:38
acidmelt acidmelt is offline
Regular
 
Default Re: lighter fluid in nano

kingsford charcoal fluid sucks ass. IMO, get some real solvents
 #7 
Old 2003-06-11, 03:54
pikk pikk is offline
Regular
 
Default Re: lighter fluid in nano

dont know AM swim has used it and still does at times . works great in a pinch also has a cool taste but swim peferrs xyline
 #8 
Old 2003-06-11, 10:35
lukkydleprachan lukkydleprachan is offline
Regular
 
Default Re: lighter fluid in nano

First hand experience with the flaming naptha, you know it pikk! Even with a fan blowing over the pot, SWIL still sustained burnt eye lashes and a badly burnt left hand, when the 8 foot tall flame ignited! Again, SWIL says, BEE-CAREFUL! Solvents are not flame friendly.

Xylene has got some real "pulling power", and SWIL never had a problem with igniting fumes when boiling either. SWIL just doesn't enjoy the really strong Ether smell.

Lukky D
 
To the best of our knowledge, the text on this page may be freely reproduced and distributed.
 

totse.com certificate signatures
 
 
About | Community | Bad Ideas | Drugs | Ego | Erotica | Fringe | Society | Technology
Hot Topics