Hi,

I have tries to make of Hydrochloric Gas (Anhydrous Hydrogen Chloride) with salt table and sulphuric acid (H2SO4-32%)

I have add acid to salt(iode) in the small Pirex pot .

but I do not have reaction smoke ?

why ? have to forget one step ?

Thx.

the gas youre trying to make is simple. use an empty 20 oz. bottle though, i dont know about the bowl you were using. but i usually used un iodized salt, not sure if it really makes a difference though. but the salt layer should be about an inch thick from the bottom. then a couple drops of youre rooto drain cleaner. next put the top on rigged with a hose and shake and squeeze. its just like magic aint it. and remember... THIS IS ONLY A DREAM......

cbl man here is what you do step by step...get 2 20 oz bottles with a small hole cut in each top of the bottles..take a small aqaurium hose and attach it to each bottle....then put masking tape around so no air can leak out or gasses =).....take one of the bottles and pour your already filtered dope into it then take the other put in about 4 to 5 table spoons of (iode) salt that works the best for the dope when itz gassing...then pour about 1/4 cup of liquid fire then hurry and attach the top for the fire cause you will see it rising to the top and trying to come out....take the bottle with the fire/salt mixture and shake it a lil then squeeze one hard time real slow tho so that when you light your dope up on the foil it will burn slow so you don't waste any dope =)...itz all in the gassing my friend...the best way is to use a bug sprayer....and then take the hose and hold it in the bottle and squeeze the trigger =)if u need anything else man jus ask or email at suttleila@netzero.com

Thank you !

Hum ok it's work with sulfuric acid concentrated 97-98 % !