About
Community
Bad Ideas
Drugs
Ego
Erotica
Fringe
Society
Technology
register | bbs | search | rss | faq | about
meet up | add to del.icio.us | digg it
Go Back   Community > Science > Laboratory Tips
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Laboratory Tips Safety proceedures, test reagents, drilling rubber stoppers, bending glass tubes, etc. Contributed to by chemists.

Reply
 
Thread Tools Display Modes
 #1 
Old 2003-06-05, 01:58
lordmighty lordmighty is offline
Regular
 
Default How to Make Anhydrous -- Very Easy!!!

How to Make Anhydrous Ammonia from Ammonium Nitrate Fertilizer by Lord Mighty

-------------------------------------------



Materials:

----------

1 2.5 Gallon Gas Can

4 ft. of 1/4 in. rubber/plastic hose

1 32 oz. Gatorade Bottle

1 Cooler

Ductape or Electrical Tape

2 cups Ammonium Nitrate Fertilizer

1 Bottle Red Devil Lye [sodium hydroxide]

1/2 bottle water [red devil bottle]

dry ice



Procedure

---------

1) Take the top off the gas can and tape one end of the hose to it. Get the cap off the gatorade bottle and poke a hole the top big enough to put the other end of the hose in it. Tape around it to make it air-tight.

2) Wrap the hose around the gatorade bottle 1 time counter-clockwise ad secure it to the side with the tape.

3) Fill your cooler with dry ice and sit the gatorade bottle (with the hose attached to it) in it.

4) Pour the 2 cups of Ammonium Nitrate fertilizer into the gas can. Pour the bottle ofd Lye into the gas can. Fill the Lye bottle half-way with water and pour that into the gas can.

5) Quickly screw the top onto the gas can, because it will start shooting out gaseous ammonia.

6) Shake the gas can for about 2 minutes and sit it down.

7) As the gas cools in the gatorade bottle, it will turn into a liquid. This is anhydrous ammonia.

8) Release the pressure for about 10 seconds every few minutes using the valve on the gas can so it doesn't explode.

9) Now you can cook your dope with this just like the juice that comes from cotton farms.

[This message has been edited by lordmighty (edited 06-05-2003).]
 #2 
Old 2003-06-05, 02:25
acidmelt acidmelt is offline
Regular
 
Default Re: How to Make Anhydrous -- Very Easy!!!

please dont
 #3 
Old 2003-06-05, 02:36
suttleila suttleila is offline
Regular
 
Default Re: How to Make Anhydrous -- Very Easy!!!

lordmightys way of makin annie from a gas tank is wrong i mean you can produce it kinda like that but his measurements is off and how often you release the valve is wrong and how often you add ingredients is wrong.....oneday when im bored ill post the correct way for now i recommend you stealing the annie from a cotton farm or takin glass cleaner with ammounia in it and mixing it with sodium hydroxide.... if you don't know the measurements then you will because when adding the sodium hydroxide to it it will shoot out a gas that is aqua ammounia im done =)
 #4 
Old 2003-06-05, 03:08
RedHorse RedHorse is offline
Regular
 
Default Re: How to Make Anhydrous -- Very Easy!!!

Hey LordMighty.....

Was wondering if you know how to alchemy convert some lead into gold and maybe make about 3 lbs of pussy flavored bubble gum. Seems that you have quite the repotoire of amazing and easy synths.. Thanks in advance for the help....
 #5 
Old 2003-06-05, 05:46
KraKleBack KinG KraKleBack KinG is offline
Regular
 
Default Re: How to Make Anhydrous -- Very Easy!!!

Your going to have a fucking nuclear fallout armagedon run like hell bomb go off when you add a half a bottle of water to the gas can. try using a lot more tubing (vinyl 1/4id x 3/8od), and a condensing coil in the dry ice bath. after playing with it a few times, i found it best to use 2 liters of nitrate : half bottle of lye : <1 tablespoon of water.
 #6 
Old 2003-06-06, 00:55
lordmighty lordmighty is offline
Regular
 
Default Re: How to Make Anhydrous -- Very Easy!!!

quote:Originally posted by suttleila:

lordmightys way of makin annie from a gas tank is wrong

ask the guy in the blue corsica back in your hometown how he did it. i guess he's wrong too.
 #7 
Old 2003-06-06, 00:58
acidmelt acidmelt is offline
Regular
 
Default Re: How to Make Anhydrous -- Very Easy!!!

ask the guy in the wooden box how he did it. i bet he followed your way too.
 #8 
Old 2003-06-06, 01:00
lordmighty lordmighty is offline
Regular
 
Default Re: How to Make Anhydrous -- Very Easy!!!

probably so...and i thought i was cardboard
 #9 
Old 2003-06-06, 01:53
suttleila suttleila is offline
Regular
 
Default Re: How to Make Anhydrous -- Very Easy!!!

kracklebackking dude your off a lil on how much to add and alot of other shit and i got that method from a biker (pimp)... I will help ya a lil get a gas can add about a liter of nitrate then add 1 bottle of lye add a bottle of water use the lye bottle then run for the shed haha....seriously that is correct and use 10 lbs of dry ice =)....release the valve then get back... the can will start to expand and will bust if you don't release the valve......after about 30 mins add a lil more lye.... then after 20 more mins or so you will have anhydrous ammounia left in the jar that was placed in the ice cooler.... take the gas and pour into a jar then drop your flakes then add a bottle of lye no water....pour in 5 or 6 bottles of ether red top can is best.... then drop in your strips use 1 strip per 100 pills of 60mg each. they will melt almost instantly and you will see the mercury substance rise to the top then tighten the jar.....slowly release the top after 10 mins of rolling or so then tighten it back let it roll at least 2 hours or so.. its best to use a light source to make it roll faster... i personally like those kind you plug into your cig lighter and you can sit the jar directly on it... also use a glass one not a plastic cause your dope will taste fucked up if you use the plastic one.....when you are done rolling take the whole jar and sit it in the dry ice that you have left let it sit for awhile watch it cause it will bust the jar if there to0 long...it takes 34lbs of pressure to bust a glass jar =) soo watch it.... then filter the dope like 2 times more if wanted but no need......then take a 20 0z bottle or one of those small plastic bottles like thermos bottles and use it gas off the dope...here is a hint gassing...if you squeeze to much then you will burn up your yield...and the faster you gas it the quicker the dope will burn..here is what you do shake the bottle mixed with liquid fire/salt mixture a lil then squeeze it one time real hard and all the dope you can possibly get will drop that means no need for a 2nd gassing =) plus it you do it like that it will be more potent...another good way of gassin is to use a bug sparayer it cuts your yield but the dope is more fire...i don't want people trying this but you can always use mercury and add that to your dope for an extra spice(don't try it if you don't know shit about metals) you will die!!!!!well if you wanna know anything else jus ask peace =)
 #10 
Old 2003-06-18, 04:47
pikk pikk is offline
Regular
 
Default Re: How to Make Anhydrous -- Very Easy!!!

that much water will kill the rxn . lord . also not enough nitrate to do very much with
 #11 
Old 2003-06-19, 01:12
suttleila suttleila is offline
Regular
 
Default Re: How to Make Anhydrous -- Very Easy!!!

pikk that much water will cause the reaction you need mixed with the lye and nh4 man wtf shut up your using someone else's method you dumbfuk i made my own its easier quicker and i yield twice as much.......30 lbs of dry ice that is sad you need 10 lbs to melt 750 g's of psedo and 8 batts =)
 #12 
Old 2003-06-19, 16:03
acidmelt acidmelt is offline
Regular
 
Default Re: How to Make Anhydrous -- Very Easy!!!

yeah he made his own method, and with all of chem skills that he has proven to us im sure that sutts method is "the Fiirrreee" right? just like you said that you could use freon and the vic method works right? come on now, please dont post anything that you dont know about, which seems to be alot.
 #13 
Old 2003-06-20, 19:16
gottagogo gottagogo is offline
Regular
 
Default Re: How to Make Anhydrous -- Very Easy!!!

All of you NOBODIES need to learn a little respect.

Sutt, again you prove your age. You sound like a 14 year old kid from the Bronx. Streetwise little wise ass. I've known a lot of them. I even thought a few of them were cool, but only when they learned how to respect those above them.

You said:

"wtf shut up your using someone else's method you dumbfuk"

You obviously don't know who pikk is. Of course not, you haven't taken the time to find out who anybody is. You might want to take some time and find out who some of these people represent. While they can't crawl through the screen and kick your ass (shit, if this was a physical situation then none of you kiddies would have gotten past your first smart assed comeback. Of this I can assure you.) they can ruin your credibility simply by responding to your posts and letting you respond to them, thus digging your own grave in the reputation department.

DID YOU NOT KNOW THAT THESE POSTS CAN BE REFERENCED AT A LATER DATE.

Whats going to happen when you grow up a little and try to say something intelligent. It'll be too late because everyone has already looked up your old posts to check you out and realize you are not only full of shit, but you are disrespectful to some of the pioneers in this field. Do you think Acidmelt is some fuckin newbee? He was figuring shit out when you were still lickin snot and you think you have the right to talk to him like that?!

YOU DON'T.

WISE UP!

SHOW SOME RESPECT!

I forgot something earlier.

Lomig--

I'm gonna go out on a limb here and say that in my opinion you may actually have something worthwhile to offer this forum SOMEDAY. I've read a FEW posts of yours that suggest you may actually want to redeem yourself, stick around and offer up some advice thats worth listening to.

Take some of mine--

Start now. Tell newbies that even though your method works for you, it probably won't work for them. If you post similar dangerous stuff, take the time to write it out intelligently, noting ALL the dangers associated with it. Thats why God invented document programs.

Just sound advice. No slander, no threats. If you have a rebuttal, try doing the same.

REMEMBER, SOME OF US HAVE OUR OWN ARCHIVE FILE AND CAN QUOTE EVERY WORD YOU HAVE ENTERED INTO THIS FORUM.



[This message has been edited by gottagogo (edited 06-20-2003).]
 
To the best of our knowledge, the text on this page may be freely reproduced and distributed.
 

totse.com certificate signatures
 
 
About | Community | Bad Ideas | Drugs | Ego | Erotica | Fringe | Society | Technology
Hot Topics