One Shot Kills
by xxxxxxxxxxxxxxxxxxxxxxxxxx
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
First this only works for the larger calibers(sorry 9mm and below).
Buy a set of molds for the caliber you use making sure its the heavy flat point type. A good source of bullet material is wheelweights.
Cast as instructed, then get a 1/4 in drill bit and tape to the maximum stop depth. {about 3/4 of the way in).
Now comes the hard part. Fill the cavity with mercury almost to the top af the bullet nose. Then, using epoxy, seal the cavity, and wait 24 to 48 hours for it to dry. Reload in your case and fire away.
NOTHING lives though one of these hitting them as the mercury "explodes" inside them, and mercury is poisonous.
|
